Hi all, my goal is to connect my trixbox server (CentOS 5.2 - kernel 2.6.18-53.1.4.el5 - * 1.4.20-1) with a legacy Philips PBX with 4 bri links provided from Digium B410P.
For this reason I set all the 4 ports of Digium's card in NT mode (Philips can not do this). Then i opportunely edited /etc/misdn-init.conf and /etc/asterisk/misdn.conf. In fact, when I run the command "misdn shows stacks" in * CLI, I can see all ports in NT (PTP) mode. Once i connect the wires from Philips PBX to the Digium's card, L2 and L1 go immediately up and i can do any calls from * to Philips and viceversa...only for 10 minutes! Then from Philips console I can see that B-channels of every port become "not usable". From that moment any calls form Philips to * fail but: 1) I can still place calls from * to Philips 2) misdn show stacks output does not underline any problem (all 4 ports appear up with L2/L1). In your opinion, how can i fix this? why this problem after 10 minutes? Thank you - Daniele p.s.: I already attempt to change some options in /etc/asterisk/misdn.conf file. I tried to put incoming_early_audio=yes (explanation: Rarely used. If turned on, sends Tone Indications on TE Port for Incoming isdn channel. Normally the telcos send that informaton. By default is 'no'). It didn't work... _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- AstriCon 2008 - September 22 - 25 Phoenix, Arizona Register Now: http://www.astricon.net asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
