I am trying to get the handytone 286 to make a very simple call to * and having problems. It registers with * just fine, but when I place a call (to echo test, for example), the RTP stream seems to have problems opening. Here is there error I get in *:
WARNING[98311]: File chan_sip.c, Line 464 (retrans_pkt): Maximum retries exceeded on call [EMAIL PROTECTED] for seqno 0 (Response) When doing traces with ethereal, I see successful SIP and SDP handshakes, but when * sends handytone RTP packets, I see a ICMP Port Unreachable messages sent from Handytone to * regarding the UDP RTP packet. * then gives up and I see a BYE from *, which handytone acks. Handytone config is default except obvious SIP registration parameters. I also have a Sipura SPA2000 and everything works perfect for that one, same extension and everything (not at same time of course). sip.conf entry: disallow=all ; Disallow all codecs allow=ilbc allow=ulaw ; Allow codecs in order of preference [131] type=friend host=dynamic reinvite=no canreinvite=no qualify=300 callerid="handytone <131>" mailbox=131 nat=0 Handytone info: Software Version: Program--1.0.4.17 Bootloader--1.0.0.11 HTML--1.0.0.19 Both on same subnet, no NAT. I have two Handytones, both exhibit same symptoms. Anyone else have this problem? -- _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users