Aqua Man wrote: > after installing asterisk 1.4.23.1 and dahdi-linux-2.1.0.4 and at CLI> > module load chan_dahdi.so receive the following: > > > > > > signalling must be specified before any channels are. > > > > > > CLI> Warning [4663]: chan_dahdi.c:11627 process_dahdi: Ignoring signalling > > > Error[4663]: chan_dahdi.c:10946 build_channels: Unable to reconfigure > channel '1' > > > Error[4663]: chan_dahdi.c:11970 reload: Reload of chan_dahdi.so is > unsuccessful! > > > > > > > > > NOTICE[4641]: loader.c:580 ast_module_reload: The module > 'chan_dahdi.so' was not properly initialized. Before reloading the > module, you must run 'module load chan_dahdi.so' and fix whatever is > preventing the module from being initialized. > > > > > > dahdi_cfg -vvv > > > > > > dahdi version: 2.1.0.4 > > > Echo Canceller(s): mg2 > > > Configuration > > > > > > Channel map: > > > > > > channel 01: fxo kewlstart (Default) (Echo Canceler: mg2) (Slaves:01) > > > channel 04: fxs kewlstart (Default) (Echo Canceler: mg2) (Slaves:04) > > > <snip>
What are the contents of chan_dahdi.conf in /etc/asterisk? Did you specify what signalling to use there? -Dave _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users