I had the same problem, I reseated the daughter card on the board and that helped but just for a short time. Eventually the port wouldn't even break dial-tone. All other ports 2, 3&4 on the card were fine, it was only port 1 giving a problem. I swapped daughter boards around between ports but the problem stayed with port 1. Maybe this is a sign of a bad run of TDM boards with some component associated with port one. I'm in the process of RMA with Digium for a new card.
What port is the problem you are experiencing? JR -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Wednesday, January 14, 2004 6:04 PM To: [EMAIL PROTECTED] Subject: [Asterisk-Users] Static Noise coming from Wildcard FXS: Wildcard TDM400P I recently plugged in Phone to my TDM400P Card to test out something I mostly use sip phones to interface with *. All of sudden I'm getting lot of line static noise coming of the card is there any settings I should look at or anything I need to do on the command line at this point I'm open to any ideas I'm running 0.7.1 on Redhat 9.0 machine. Any insight would be greatly appreciated. -Frankie Gravato [aolim]:cronparser [irc]:crontibs _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
