Hi, On Mon, Nov 09, 2009 at 12:52:15PM +0200, Khaled W Chehab wrote: > Hi, > > I have a digium card (igium, Inc. Wildcard TE405P quad-span T1/E1/J1 card > 5.0V (rev 02)) 4 ports > > I want to make a loop test between digium card E1 to test the > configuration of dahdi
This is fairly simple. But I figure it is best that you actually understand what happens here. > > What I want to do scenario is > > I connect port 1 and port4 in the digium card with E1 cable > > SIPcall-->E1 Digium port 1--->(Loop)E1 port 2---->sip extension local. In this scenario we have several different Asterisk channels: 1. SIPcall -> E1-port1 Incoming call from SIP generates a SIP channel. The dialplan context for it is set in sip.conf . You want it to generate a call to some DAHDI channel. This could be done using e.g. Dial(DAHDI/g1) (why g1? To what channels does it refer? See documentation in chan_dahdi.conf to see why I set it like that. Much of it is arbitrary). 2. E1-port1 -> E1-port2 Loopback cable. It seems that you connected port 1 to port 4 rather than to port 2, right? 3. E1-port2 -> sip extension Now we have an incoming DAHDI call. The dialplan context is set from 'context' in chan_dahdi.conf (where exactly?) . Now you'll probably need to use some dialplan such as: Dial(SIP/your-local-sip-extension) -- Tzafrir Cohen icq#16849755 jabber:tzafrir.co...@xorcom.com +972-50-7952406 mailto:tzafrir.co...@xorcom.com http://www.xorcom.com iax:gu...@local.xorcom.com/tzafrir _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users