In your zapata.conf, under group 0 do: channel => 1-3,5-20. It works for PRI but haven't tried it for FXO.
Have you tried disabling this line in zaptel.conf? Maybe that'll help. Zeeshan A Zakaria -- Sent from my Android phone with K-9 Mail. On 2010-04-08 8:29 AM, "bruce bruce" <bruceb...@gmail.com> wrote: Thanks guys for all the input. I have just noticed that the solution doesn't work for me because the 20 lines are in a hunt. And the line in problem is actually the 4th line and not the 1st. So, for incoming calls, if I have more than 3 calls the 4th one will keep ringing for ever and it won't go to the 5th line unless there is a busy on it. Is there anyway I can put a busy voltage on this line without ramping up a big bill? If the line status shows busy then both of incoming and outgoing calls will use the next line available. I am trying to go this route for couple of days until I get the telco to drop by or if the darn rain stops. Thanks, Bruce On Wed, Apr 7, 2010 at 2:56 PM, Danny Nicholas <da...@debsinc.com> wrote: > > Since this is hopefu... -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
-- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users