You're still receiving [Incompatible destination], this cause is used when bearer capabilities aren't equal.
----- Original Message ----- From: "Thomas Haeger" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Thursday, January 22, 2004 3:07 PM Subject: AW: [Asterisk-Users] Data calls (ISDN/64k) through * PRI > Hi, > > we tried following scenario: > > > DTAG (S0) at our office Datacall with AVMFritz (PSTN) ---> Colo > TelesSwitch --> CoLo Asterisk (---> PSTN) > > I think, no i know that the Teles Switch can route 64k data calls > here is the Teles Trace: > > #000008 SETUP-->| > 15:29:40,378 02 01 78 AE | > 08 02 03 90 05 | > Bearer Caps 04 02 88 90 | > Channel Id 18 03 A1 83 9B | > Calling PN 6C 0C 21 83 33 33 32 38 | > 33 33 34 37 37 38 | > Called PN 70 09 C1 36 33 34 39 34 | > 34 34 31 | > |<--RR > #000008 > | 15:29:40,388 02 01 01 7A > |<--SETUP ACKNOWLEDGE > #000008 > | 15:29:40,398 00 01 AE 7A > | 08 02 83 90 0D > | Channel Id 18 03 A9 83 9B > |<--SETUP > #000012 > | 15:29:40,408 00 01 2A D4 > | 08 02 16 60 05 > | Bearer Caps 04 02 88 90 > | Channel Id 18 03 A1 83 88 > | Calling PN 6C 0C 21 80 33 33 32 > 38 > | 33 33 34 37 37 38 > | Called PN 70 09 81 36 33 34 39 > 34 > | 34 34 31 > #000008 RR-->| > 15:29:40,408 00 01 01 B0 | > #000012 RR-->| > 15:29:40,418 00 01 01 2C | > #000012 SETUP ACKNOWLEDGE-->| > 15:29:40,418 02 01 D4 2C | > 08 02 96 60 0D | > Channel Id 18 03 A9 83 88 | > Progress Ind 1E 02 81 82 | > |<--RR > #000012 > | 15:29:40,418 02 01 01 D6 > #000012 SETUP-->| > 15:29:40,428 02 01 D6 2C | > 08 02 1A 21 05 | > Bearer Caps 04 03 88 90 A3 | > Channel Id 18 03 A1 83 81 | > Calling PN 6C 0C 41 81 33 33 32 38 | > 33 33 34 37 37 38 | > Called PN 70 0D C1 30 33 33 32 38 | > 33 30 37 37 37 33 33 | > |<--RELEASE COMPLETE > #000012 > | 15:29:40,428 00 01 2C D8 > | 08 02 9A 21 5A > | 08 02 80 D8 > | [Incompatible > destinat > | ion] > #000012 RR-->| > > -----Ursprüngliche Nachricht----- > Von: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] Auftrag von CW_ASN - > Gus > Gesendet: Donnerstag, 22. Januar 2004 17:24 > An: [EMAIL PROTECTED] > Betreff: Re: [Asterisk-Users] Data calls (ISDN/64k) through * PRI > > > The incoming call request Unrestricted and 64K, and this looks like ok, but > in the SETUP_ACK the called number parameters shows: "Ext: 1 Progress > Description: Called equipment is non-ISDN. (2) ]", like as is not an ISDN > equipment. > In the most of cases, Information transfer rate = to '64 kbit/s', and Info > transfer capability = 'real bw required'. > > Are you sure that the equipment attached to * can be used in 64K? > > Regards, > > Gus > > ----- Original Message ----- > From: "Thomas Haeger" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Thursday, January 22, 2004 12:28 PM > Subject: AW: [Asterisk-Users] Data calls (ISDN/64k) through * PRI > > > > Hi , > > > > maybe someone knows what's going wrong... > > > > The incoming data call will not really identified as ISDN 64k/Data.... > > > > Here my pri debug ouput > > > > < Protocol Discriminator: Q.931 (8) len=39 > > < Call Ref: len= 2 (reference 5635/0x1603) (Originator) > > < Message type: SETUP (5) > > < Bearer Capability (len= 2) [ Ext: 1 Q.931 Std: 0 Info transfer > > capability: Unrestricted digital information (8) > > < Ext: 1 Trans mode/rate: 64kbps, > circuit-mode > > (16) > > < Ext: 0 User information layer 1: Unknown > > (24) > > < Channel ID (len= 5) [ Ext: 1 IntID: Implicit, PRI Spare: 0, Preferred > > Dchan: 0 > > < ChanSel: Reserved > > < Ext: 1 Coding: 0 Number Specified Channel > Type: > > 3 > > < Ext: 1 Channel: 30 ] > > < Calling Number (len=14) [ Ext: 0 TON: National Number (2) NPI: > > ISDN/Telephony Numbering Plan (E.164/E.163) (1) > > < Presentation: Presentation permitted, user > > number not screened (0) '3328334778' ] > > < Called Number (len=11) [ Ext: 1 TON: Unknown Number Type (0) NPI: > > ISDN/Telephony Numbering Plan (E.164/E.163) (1) '63494441' ] > > -- Making new call for cr 5635 > > -- Processing Q.931 Call Setup > > -- Processing IE 4 (Bearer Capability) > > -- Processing IE 24 (Channel Identification) > > -- Processing IE 108 (Calling Party Number) > > -- Processing IE 112 (Called Party Number) > > > Protocol Discriminator: Q.931 (8) len=14 > > > Call Ref: len= 2 (reference 38403/0x9603) (Terminator) > > > Message type: SETUP ACKNOWLEDGE (13) > > > Channel ID (len= 5) [ Ext: 1 IntID: Implicit, PRI Spare: 0, Exclusive > > Dchan: 0 > > > ChanSel: Reserved > > > Ext: 1 Coding: 0 Number Specified Channel > Type: > > 3 > > > Ext: 1 Channel: 30 ] > > > Progress Indicator (len= 2) [ Ext: 1 Coding: CCITT (ITU) standard (0) > 0: > > 0 Location: Private network serving the local user (1) > > > Ext: 1 Progress Description: Called > > equipment is non-ISDN. (2) ] > > -- Accepting call from '3328334778' to '63494441' on channel 30, span > 2 > > -- Executing GotoIf("Zap/61-1", "0?50:100") in new stack > > -- Goto (pri2,63494441,100) > > -- Executing Dial("Zap/61-1", "Zap/g2/033283077733SPEECH") in new > stack > > -- Making new call for cr 39439 > > > Protocol Discriminator: Q.931 (8) len=50 > > > Call Ref: len= 2 (reference 6671/0x1A0F) (Originator) > > > Message type: SETUP (5) > > > Bearer Capability (len= 3) [ Ext: 1 Q.931 Std: 0 Info transfer > > capability: Speech (0) > > > Ext: 1 Trans mode/rate: 64kbps, > circuit-mode > > (16) > > > Ext: 1 User information layer 1: A-Law > (35) > > > Channel ID (len= 5) [ Ext: 1 IntID: Implicit, PRI Spare: 0, Preferred > > Dchan: 0 > > > ChanSel: Reserved > > > Ext: 1 Coding: 0 Number Specified Channel > Type: > > 3 > > > Ext: 1 Channel: 1 ] > > > Calling Number (len=14) [ Ext: 0 TON: Subscriber Number (4) NPI: > > ISDN/Telephony Numbering Plan (E.164/E.163) (1) > > > Presentation: Presentation permitted, user > > number passed network screening (1) '3328334778' ] > > > Called Number (len=21) [ Ext: 1 TON: Subscriber Number (4) NPI: > > ISDN/Telephony Numbering Plan (E.164/E.163) (1) '033283077733SPEECH' ] > > -- Called g2/033283077733SPEECH > > < Protocol Discriminator: Q.931 (8) len=10 > > < Call Ref: len= 2 (reference 39439/0x9A0F) (Terminator) > > > > < Message type: SETUP ACKNOWLEDGE (13) > > < Channel ID (len= 5) [ Ext: 1 IntID: Implicit, PRI Spare: 0, Exclusive > > Dchan: 0 > > < ChanSel: Reserved > > < Ext: 1 Coding: 0 Number Specified Channel > Type: > > 3 > > < Ext: 1 Channel: 1 ] > > -- Processing IE 24 (Channel Identification) > > beroasterisk*CLI> > > < Protocol Discriminator: Q.931 (8) len=9 > > < Call Ref: len= 2 (reference 5635/0x1603) (Originator) > > < Message type: DISCONNECT (69) > > < Cause (len= 2) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 > Location: > > User (0) > > < Ext: 1 Cause: Normal Clearing (16), class = Normal > Event > > (1) ] > > -- Processing IE 8 (Cause) > > -- Channel 30, span 2 got hangup > > NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Overlap sending, peerstate > > Overlap Receiving > > > Protocol Discriminator: Q.931 (8) len=9 > > > Call Ref: len= 2 (reference 6671/0x1A0F) (Originator) > > > Message type: DISCONNECT (69) > > > Cause (len= 2) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 > Location: > > Private network serving the local user (1) > > > Ext: 1 Cause: Normal Clearing (16), class = Normal > Event > > (1) ] > > -- Hungup 'Zap/32-1' > > == Spawn extension (pri2, 63494441, 100) exited non-zero on 'Zap/61-1' > > < Protocol Discriminator: Q.931 (8) len=9 > > < Call Ref: len= 2 (reference 39439/0x9A0F) (Terminator) > > < Message type: RELEASE (77) > > < Cause (len= 2) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 > Location: > > User (0) > > < Ext: 1 Cause: Normal Clearing (16), class = Normal > Event > > (1) ] > > -- Processing IE 8 (Cause) > > NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Release > > Request > > > Protocol Discriminator: Q.931 (8) len=9 > > > Call Ref: len= 2 (reference 6671/0x1A0F) (Originator) > > > Message type: RELEASE COMPLETE (90) > > > Cause (len= 2) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 > Location: > > Private network serving the local user (1) > > > Ext: 1 Cause: Normal Clearing (16), class = Normal > Event > > (1) ] > > NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Null > > NEW_HANGUP DEBUG: Destroying the call, ourstate Null, peerstate Null > > NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Disconnect Indication, > > peerstate Disconnect Request > > > Protocol Discriminator: Q.931 (8) len=9 > > > Call Ref: len= 2 (reference 38403/0x9603) (Terminator) > > > Message type: RELEASE (77) > > > Cause (len= 2) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 > Location: > > Private network serving the local user (1) > > > Ext: 1 Cause: Normal Clearing (16), class = Normal > Event > > (1) ] > > -- Hungup 'Zap/61-1' > > < Protocol Discriminator: Q.931 (8) len=5 > > < Call Ref: len= 2 (reference 5635/0x1603) (Originator) > > < Message type: RELEASE COMPLETE (90) > > NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Null > > NEW_HANGUP DEBUG: Destroying the call, ourstate Null, peerstate Null > > beroasterisk*CLI> > > > > > > > > > > > > > > -----Ursprungliche Nachricht----- > > Von: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED] Auftrag von Maik > > Schmitt > > Gesendet: Donnerstag, 22. Januar 2004 15:32 > > An: [EMAIL PROTECTED] > > Betreff: Re: [Asterisk-Users] Data calls (ISDN/64k) through * PRI > > > > > > > is there any special version from libpri or asterisk necessary since it > > > works ? > > > > > > I'am runnig version: CVS-11/11/03-11:49:55.... and it don't work :-( > > > > We have CVS-11/24/03-12:12:10 > > > > -- > > Maik Schmitt http://graphics.cs.uni-sb.de/VoIP > > > > _______________________________________________ > > Asterisk-Users mailing list > > [EMAIL PROTECTED] > > http://lists.digium.com/mailman/listinfo/asterisk-users > > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users