Thanks Shaun. Unfortunately, I am still using zaptel. Is there a similar command in zaptel?
> -----Original Message----- > From: asterisk-users-boun...@lists.digium.com [mailto:asterisk-users- > boun...@lists.digium.com] On Behalf Of Shaun Ruffell > Sent: Thursday, 30 September 2010 1:00 AM > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: Re: [asterisk-users] Use modprobe to find E1/T1 jumper setting > onPRI card > > On 09/29/2010 02:52 AM, Lee, John (Sydney) wrote: > > Do you mean that if I could define 30 channels in span 1 for > > example, then span 1 is set to E1? > > > > If not, then it is T1. > > > > You could also see this information in the "type" output from > dahdi_scan. For example before configuring a span: > > # ./dahdi_scan > [1] > active=yes > alarms=UNCONFIGURED > description=Wildcard TE122 Card 0 > name=WCT1/0 > manufacturer=Digium > devicetype=Wildcard TE122 > location=PCI Bus 15 Slot 05 > basechan=1 > totchans=24 > irq=90 > type=digital-T1 > syncsrc=0 > lbo=0 db (CSU)/0-133 feet (DSX-1) > coding_opts=B8ZS,AMI > framing_opts=ESF,D4 > coding= > framing= > > > -- > Shaun Ruffell > Digium, Inc. | Linux Kernel Developer > 445 Jan Davis Drive NW - Huntsville, AL 35806 - USA > Check us out at: www.digium.com & www.asterisk.org > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > New to Asterisk? Join us for a live introductory webinar every Thurs: > http://www.asterisk.org/hello > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users