2011/9/6 Esteban Cacavelos <estebancacave...@gmail.com> > > > 2011/9/6 Esteban Cacavelos <estebancacave...@gmail.com> > >> >> >> 2011/9/6 Leif Madsen <leif.mad...@asteriskdocs.org> >> >>> On 04/09/11 02:51 PM, Tamer Higazi wrote: >>> >>>> the 3rd edition is available, but that book covers every thing to run >>>> the asterisk PBX. >>>> >>> >>> You can read the 3rd edition online at http://ofps.oreilly.com/** >>> titles/9780596517342/ <http://ofps.oreilly.com/titles/9780596517342/> >>> >>> HTH! >>> Leif. >>> >>> -- >>> Leif Madsen >>> http://www.oreilly.com/**catalog/asterisk<http://www.oreilly.com/catalog/asterisk> >>> >>> >>> -- >>> ______________________________**______________________________** >>> _________ >>> -- Bandwidth and Colocation Provided by http://www.api-digital.com -- >>> New to Asterisk? Join us for a live introductory webinar every Thurs: >>> http://www.asterisk.org/hello >>> >>> asterisk-users mailing list >>> To UNSUBSCRIBE or update options visit: >>> >>> http://lists.digium.com/**mailman/listinfo/asterisk-**users<http://lists.digium.com/mailman/listinfo/asterisk-users> >>> >> >> >> Thanks for all the responses !. I will try with ubuntu bundleded packages >> first. >> >> I will post my results. >> >> >> >> Esteban >> -- >> Esteban L. Cacavelos de Amoriza >> Cel: 0981 220 429 >> > > > finally i decided to install from source because the documentation suggest > that. > > I've installed successfully asterisk+dahdi+libpri. I tested a basic SIP > configuration and there were no problems. > > Now i have problems with pstn termination and origination. I have one fxo > module from witch i want to make and receive calls. Can I do that ?. I'll > post my configuration files. > > I want to make calls from my android phone (where i have a SIP client) and > recieve calls from my analog line through my androi. > > My country code is 595, city code 21, number , xxx xxx > > > chan_dahdi.conf > > [channels] > > ; > ; To apply other options to these channels, put them before "channel". > ; > signalling=fxs_ks ; in Asterisk, FXO channels use FXS signaling > ; (and yes, FXS channels use FXO signaling) > context=from-pstn > channel => 1 ; apply all the previously defined settings to this > channel > > > extensions.conf > [LocalSets] > > exten => 100,1,Dial(SIP/android-esteban) ; Replace 0000FFFF0001 with your > device name > > exten => 101,1,Dial(SIP/recepcion) ; Replace 0000FFFF0002 with your device > name > > > exten => 200,1,Answer() > same => n,Playback(hello-world) > same => n,Hangup() > > ; TERMINATION > [from-voip-network] > exten => _X.,1,Verbose(2, Call from VoIP network to ${EXTEN}) > same => n,Dial(DAHDI/g0/${EXTEN}) > > ORIGINATION > [from-pstn] > ; This is the context that would be listed in the config file > ; for the circuit (i.e. chan_dahdi.conf) > > exten => _X.,1,Dial(SIP/android-esteban) > > [number-mapping] > ; This context is not strictly required, but will make it easier > ; to keep track of your DIDs in a single location in your dialplan. > ; From here you can pass the call to another part of the dialplan > ; where the actual dialplan work will take place. > > exten => 59521xxxxxx,1,Dial(SIP/android-esteban) > > exten => i,1,Verbose(2,Incoming call to invalid number) > > > > > Dahdi system.conf > > # Autogenerated by /usr/sbin/dahdi_genconf on Tue Sep 6 14:40:03 2011 > # If you edit this file and execute /usr/sbin/dahdi_genconf again, > # your manual changes will be LOST. > # Dahdi Configuration File > # > # This file is parsed by the Dahdi Configurator, dahdi_cfg > # > # Span 1: WCTDM/4 "Wildcard TDM400P REV I Board 5" (MASTER) > fxsks=1 > echocanceller=mg2,1 > # channel 2, WCTDM/4/1, no module. > # channel 3, WCTDM/4/2, no module. > # channel 4, WCTDM/4/3, no module. > > # Global data > > loadzone = us > defaultzone = us > > > > Thanks in advance ! > > -- > Esteban L. Cacavelos de Amoriza > Cel: 0981 220 429 >
dahdi_genconf should generate chan_dahdi.conf file ?. It generates these two files dahdi_genconf -v Default parameters from /etc/dahdi/genconf_parameters Generating /etc/dahdi/system.conf Generating /etc/asterisk/dahdi-channels.conf or i must create manually chan_dahdi.conf and include dahdi-channels.conf ? BR -- Esteban L. Cacavelos de Amoriza Cel: 0981 220 429
-- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users