On Thu, Apr 05, 2012 at 01:07:11PM -0400, Mathieu Therrien wrote: > I don't think neon use FSK, neon should use high voltage. So I think, > the issue should be on FSK in DAHDI module code.
It sounds like we're in agreement. Although, to be clear, DAHDI-Linux (the kernel modules) do not generate or decode FSK spills. That is done by chan_dahdi in Asterisk. > On Thu, Apr 5, 2012 at 11:50, Shaun Ruffell <sruff...@digium.com> wrote: > > On Thu, Apr 05, 2012 at 08:14:09AM -0400, Mathieu Therrien wrote: > >> Thanks for answer. Devices PAP2 and SPA3000 works good and use FSK for > >> VMWI and CallerID, so I think TDM410P should also works. CallerID works > >> good. So issue should be in source code of VMWI. > > > > Alec, If FSK is used for VMWI on his working setup, this doesn't > > sound like it would be fixed by your "Generate VMWI neon pulses from > > FXS module.." patch to the wctdm24xxp DAHDI driver [1] I'm assuming. > > Must be something in chan_dahdi? > > > > But Now that the changes to the wctdm24xxp have calmed down (for > > awhile now... :/) it looks like it might be time to try again to > > rebase those patches on the current trunk. > > > > [1] https://reviewboard.asterisk.org/r/1144/ > > > > Cheers, > > Shaun -- Shaun Ruffell Digium, Inc. | Linux Kernel Developer 445 Jan Davis Drive NW - Huntsville, AL 35806 - USA Check us out at: www.digium.com & www.asterisk.org -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users