On Wed, 08 Apr 2015 16:10:30 -0700 thufir <hawat.thu...@gmail.com> wrote:
> I want to do something like: > > > exten => _NXXXNxxxxxx,1,Dial(${BABY}/${EXTEN}) > exten => _Nxxxxxx,1,Dial(${BABY}/${EXTEN}) > exten => _1NXXNxxxxxx,1,Dial(${BABY}/${EXTEN}) > exten => _011.,1,Dial(Dial({TOLL}/${EXTEN}) > exten => _9NXXXNxxxxxx,1,Dial(${BABY}/${EXTEN}) > exten => _9Nxxxxxx,1,Dial(${BABY}/${EXTEN}) > exten => _91NXXNxxxxxx,1,Dial(${BABY}/${EXTEN}) > exten => _9011.,1,Dial(Dial({TOLL}/${EXTEN}) > > (adapted from the book) > > > but don't know where to put those lines. I have BABY defined as > channel variable: > > BABY = SIP/babytel_out > > but that seems circular, somehow. You put them in the context for your clients... From what you show below, I'd say they go in the "local_200" context. You can verify this by looking in sip.conf, in the section that starts with [200], find the line that starts with "context=". It's probably "context=local_200". Then you put the outbound dialplan in that context in extensions.conf. Mind you, then 200 is the only phone that can dial out. 201 can only dial 200 and nothing else. One suggestion... those 8 lines are redundant. The first 4 let you dial out without the 9 in front, and the last 4 need you to dial 9 to get out. You should probably decide which way you want to do it, and use only 4 of the lines instead of 8. Keep it simple. Also, if you don't use 7-digit dialing in your area, you can drop the second line (_Nxxxxxx) and only have 3. Mind you, even if your local area supports 7-digit dialing, I'm guessing babytel doesn't, so it wouldn't even work like that. You would have to add your area code (or 1 and your area code) after the slash between ${BABY} and ${EXTEN}, just on that one line. > inbound calls work fine: > > [inbound-calls] > exten => 16046289850,1,Dial(SIP/200) > > [local_200] > exten => _9x.,1,Set(CALLERID(all)="Ali Baba" <123456789>) > exten => _9x.,1,Dial(SIP/${EXTEN:1}@babytel_out) > exten => 201,1,Dial(SIP/201) > > [local_201] > exten => 200,1,Dial(SIP/200) > > > in local_200, that just seems suspect. Yes, dial out, but shouldn't > it be using BABY? I don't understand why it's using sub-string with > the 1. That's a different syntax for the same thing. These three lines all do the same thing: exten => _9x.,1,Dial(SIP/${EXTEN:1}@babytel_out) and exten => _9x.,1,Dial(SIP/babytel_out/${EXTEN:1}) and exten => _9x.,1,Dial(${BABY}/${EXTEN:1}) The ${EXTEN:1} strips off the "9" at the front of EXTEN, because babytel doesn't want to get the 9 that you dial on the phone. If you go with dialing without the 9, you'll use ${EXTEN}, not ${EXTEN:1}. -- C. Chad Wallace, B.Sc. The Lodging Company http://www.lodgingcompany.com/ OpenPGP Public Key ID: 0x262208A0 -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users