Yes, it is working! tcpdump -ni any port 4569 dropped privs to tcpdump tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on any, link-type LINUX_SLL (Linux cooked), capture size 262144 bytes 14:20:42.184521 IP 10.0.0.108.4569 > 10.0.0.100.4569: UDP, length 53 14:20:42.184921 IP 10.0.0.100.4569 > 10.0.0.108.4569: UDP, length 37 14:20:42.190529 IP 10.0.0.108.4569 > 10.0.0.100.4569: UDP, length 83 14:20:42.190639 IP 10.0.0.100.4569 > 10.0.0.108.4569: UDP, length 71 14:20:42.191378 IP 10.0.0.108.4569 > 10.0.0.100.4569: UDP, length 12 14:20:45.320191 IP 192.168.141.7.4569 > 192.168.141.1.4569: UDP, length 31 14:20:45.338718 IP 192.168.141.1.4569 > 192.168.141.7.4569: UDP, length 65 14:20:45.338875 IP 192.168.141.7.4569 > 192.168.141.1.4569: UDP, length 82 14:20:45.357173 IP 192.168.141.1.4569 > 192.168.141.7.4569: UDP, length 40 14:20:45.357331 IP 192.168.141.7.4569 > 192.168.141.1.4569: UDP, length 65 14:20:45.376559 IP 192.168.141.1.4569 > 192.168.141.7.4569: UDP, length 53 14:20:45.376630 IP 192.168.141.7.4569 > 192.168.141.1.4569: UDP, length 12 ^C 12 packets captured 12 packets received by filter 0 packets dropped by kernel
Thelma On 06/05/2017 02:17 PM, Marcelo Terres wrote: > You can use tcpdump in your server to verify if it is receiving the > packets. > > tcpdump -ni any port 4569 > > So you have more than one ip in the server? > > On 5 Jun 2017 9:13 pm, <the...@sys-concept.com> wrote: > >> No, I don't think it is IP table issue, I've not upgraded dd-wrt for a >> while and it was zoiper was working OK with my previous version of >> asterisk. >> >> After upgrade to 11.25.1 it stop working. >> I'm sure port forwarding on dd-wrt is working OK as I have port 80 and >> 443 open. >> >> >> Thelma >> On 06/05/2017 07:12 AM, Christopher van de Sande wrote: >>> Another might be to make sure iptables isn't blocking the connection. >>> >>> You can run >>> iptables -L -n -v >>> To see if its set to block any ports. >>> >>> >>> On June 5, 2017 9:06:55 AM EDT, the...@sys-concept.com wrote: >>>> I'm getting: >>>> netstat -a |grep 4569 >>>> udp 0 0 0.0.0.0:4569 0.0.0.0:* >>>> >>>> Should I be getting localhost IP? >>>> >>>> Thelma >>>> >>>> On 06/05/2017 06:48 AM, the...@sys-concept.com wrote: >>>>> Does asterisk listen on port 4569 by default? >>>>> >>>>> I'm running version Asterisk 11.25.1 and have a problem registering >>>>> Zoiper (IAX) to Asterisk. >>>>> I'm getting an error: >>>>> Registration refused >>>>> >>>> >>>> -- >>>> _____________________________________________________________________ >>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com -- >>>> >>>> Check out the new Asterisk community forum at: >>>> https://community.asterisk.org/ >>>> >>>> New to Asterisk? Start here: >>>> https://wiki.asterisk.org/wiki/display/AST/Getting+Started >>>> >>>> asterisk-users mailing list >>>> To UNSUBSCRIBE or update options visit: >>>> http://lists.digium.com/mailman/listinfo/asterisk-users >>> >>> >>> >> >> -- >> _____________________________________________________________________ >> -- Bandwidth and Colocation Provided by http://www.api-digital.com -- >> >> Check out the new Asterisk community forum at: https://community.asterisk. >> org/ >> >> New to Asterisk? Start here: >> https://wiki.asterisk.org/wiki/display/AST/Getting+Started >> >> asterisk-users mailing list >> To UNSUBSCRIBE or update options visit: >> http://lists.digium.com/mailman/listinfo/asterisk-users >> > > > -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- Check out the new Asterisk community forum at: https://community.asterisk.org/ New to Asterisk? Start here: https://wiki.asterisk.org/wiki/display/AST/Getting+Started asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users