Try to use the echo app. If you can listen your echo, so it is something in the network.
Regards, Marcelo H. Terres <mhter...@gmail.com> IM: mhter...@jabber.mundoopensource.com.br https://www.mundoopensource.com.br https://twitter.com/mhterres https://linkedin.com/in/marceloterres On 6 June 2017 at 14:18, andre castro <an...@andrecastro.info> wrote: > hello folks, > this might be a simple question... > > I just installed asterisk in a debian server. > All seems to be running fine, but the audio sent by the server. > If I have one of my registered peers call and extension (102) that plays > back audio (extension.conf and sip.conf coffee-pasted below), Asterisk > answers and prints no errors. > Its `sip show channels` prints: > > Peer User/ANR Call ID Format Hold Last Message Expiry > Peer > peer.ip 1001 1...-5060 (ulaw) No Rx: ACK > 1001 > > But I hear nothing at the peer's end. > > When one peer calls another, sound comes through just fine. > So my hunch is that is something to do with the audio supplied by the > server. > Do I need to have alsa installed?? > Any hint? > > sip.conf: > > [general] > context = unauthenticated > bindport = 5060 > bindaddr = 0.0.0.0 > tcpbindaddr = 0.0.0.0 > tcpenable = yes > videosupport = no > textsupport=yes > alwaysauthreject=yes > allowguest=no > > [1001] ; grandstream 1 > context = home > type = friend > callerid = One <1001> > secret = XYZ > host = dynamic > mailbox = 1001 > disallow = all > allow = ulaw > transport = udp > dtmfmode=auto ; accept touch-tones from the devices, negotiated > automatically > nat=force_rport > > [1005] ; mobile > context = home > type = friend > callerid = Five <1005> > secret = XYZ > host = dynamic > mailbox = 1005 > disallow = all > allow = ulaw > transport = udp > dtmfmode=auto ; accept touch-tones from the devices, negotiated > automatically > nat=force_rport > > > extensions.conf: > [home] > exten = 102,1,Answer() > same = n,Wait(1) > same = n,Playback(beep) > same = n,Wait(1) > same = n,Playback(im-sorry) > same = n,Wait(1) > same = n,Playback(number-not-answering) > same = n,Wait(1) > same = n,Hangup() > > exten => 1001,1,Dial(SIP/1001) ; grandstream phone > exten => 1005,1,Dial(SIP/1005) ; mobile > > > > > -- > oooooooooo.io > bibliotecha.info > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > Check out the new Asterisk community forum at: https://community.asterisk.org/ > > New to Asterisk? Start here: > https://wiki.asterisk.org/wiki/display/AST/Getting+Started > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- Check out the new Asterisk community forum at: https://community.asterisk.org/ New to Asterisk? Start here: https://wiki.asterisk.org/wiki/display/AST/Getting+Started asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users