On Thu, Apr 5, 2018 at 7:20 AM, Mtt Cannon <mcannon9...@gmail.com> wrote:
> > > I am trying to setup Asterisk to act like a PBX connected via a PRI > gateway to a voice netowrk where Asterisk is doing outbound > overlap dialing for calls that terminate via that PRI. AFter researching > through the archives and online dcocs, I thought I had > everyting setup right, dialplan configured for '_X!' and the > 'overlapdial=yes' in the chan_dahdi.conf file, but when I try and > make a call, while the first digit triggers the outbound SETUP message, > that SETUP message always includes a 'Sending Complete' > parameter and any subsequent digits received from the originaing client > seem to be getting ignored as opposed to sent over in > subsequent ISDN INFORMATION messages. > > Any idea what I might be missing here...i did restart both DAHDI and > Asterisk after making the changes to support overlap. > > Logs and snippets are below.. > > Thanks > matt > > > localhost*CLI> core show version > Asterisk 15.2.0 built by root @ localhost.localdomain on a x86_64 running > Linux on 2018-02-21 19:10:36 UTC > > > chan_dahdi.conf > > ; Overlap dialing mode (sending overlap digits) > ; Cannot be changed on a reload. > ; > ; incoming: incoming direction only > ; outgoing: outgoing direction only > ; no: neither direction > ; yes or both: both directions > ; > overlapdial=yes > Where is this option set in the chan_dahdi.conf file? To have any effect on a particular channel the option MUST be set before the channel line that creates the channel. [channels] context=incoming switchtype=euroisdn signaling=pri_cpe overlapdial=yes ; All options currently set are used to create the specified channels on the next line. channel=1-15,17-31 ; Any options set AFTER the channel line above DO NOT affect those channels. context=other Richard
-- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- Check out the new Asterisk community forum at: https://community.asterisk.org/ New to Asterisk? Start here: https://wiki.asterisk.org/wiki/display/AST/Getting+Started asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users