Hello I am hunting Fax Problems.
Now I have come across a situation on which, I fear asterisk behaves in a wrong manner.. A T.38 enabled ATA is connected to the asterisk and receiving a call from a non T.38 capable endpoint. The ATA is detecting the CED tone and initiating a T.38 re-invite. Asterisk forwards that T.38 Re-invite to the non T.38 endpoint. The non T.38 endpoint answers with 415 Unsupported Media. From my point of view, Asterisk should now forward this to the ATA so it can Fallback to G.711. But this does not happen. What follows next is: Asterisk issuing Bye to the non T.38 endpoint ending the call. Asterisk answering 200 Ok to the ATA initiating T.38 (weird!) Asterisk re-sending an invite T.38 to the NON T.38 endpoint after ending the call (even weirder). That Endpoint is the outgoing trunk so it challenges that invite with a 401 challenge, causing the asterisk to also drop the other leg. So what's going wrong here? (PCAP attached). I know, most Endpoints to reply with 488 when fallback to g711 is required. This one does send 415, which IMHO is also valid. Any ideas? Asterisk 13.14.1 in use. -- -Benoît Panizzon- -- I m p r o W a r e A G - Leiter Commerce Kunden ______________________________________________________ Zurlindenstrasse 29 Tel +41 61 826 93 00 CH-4133 Pratteln Fax +41 61 826 93 01 Schweiz Web http://www.imp.ch ______________________________________________________
415-on-T38-fallback.pcapng
Description: application/pcapng
-- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- Check out the new Asterisk community forum at: https://community.asterisk.org/ New to Asterisk? Start here: https://wiki.asterisk.org/wiki/display/AST/Getting+Started asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
