On Thu, Oct 13, 2022 at 2:16 PM Jerry Geis <jerry.g...@gmail.com> wrote:
> I have a simple dialplan with asterisk 18.14.0 > > exten => 141,1,Answer > exten => 141,n,Noop(MC) > exten => 141,n,Playback(beep) > exten => 141,n,Dial(MulticastRTP/basic/239.168.4.90:30410//t(15)) > exten => 141,n,Hangup > > Most times this works just fine ... Once in a while the person hears the > beep - but nothing connects on the multicast. > > What might this be? How can I tell what is happening and why it does not > connect? > > is it valid to put : > exten => 141,n,Dial(MulticastRTP/basic/239.168.4.90:30410//t(15)) > exten => 141,n,Dial(MulticastRTP/basic/239.168.4.90:30410//t(15)) > > So if the first one doesnt connect perhaps the second one will ??? > Thanks > Multicast doesn't connect. There is no session. RTP is thrown out onto the network using multicast, and then devices pick it up. Asterisk has no idea what (if anything) is receiving it. You'd want to do a packet capture to see what is being multicast. -- Joshua C. Colp Asterisk Project Lead Sangoma Technologies Check us out at www.sangoma.com and www.asterisk.org
-- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- Check out the new Asterisk community forum at: https://community.asterisk.org/ New to Asterisk? Start here: https://wiki.asterisk.org/wiki/display/AST/Getting+Started asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users