On Wed, Dec 7, 2022 at 2:14 PM Jerry Geis <jerry.g...@gmail.com> wrote:
> Hi All, > > I have a physical SIP gateway device. It has 5 SIP extensions connected to > Asterisk 10001-10005. > These are all registered - will call this unit the SIPGW. > > If I use Two different phones one to call 10001 and keep the line open - > then call 10002 this works. both calls are answered and speaking. > > So if I make a call from my asterisk server with "call files" one to the > 10001 it answers - and one to the 10002 - at different times - BOTH work. > > However if I make the 10001 call - and while its still speaking I call the > 10002 - the second call gets unanswered till the first call is completed. > I'm guessing that is a function of the SIPGW - good or bad.... > > Take that a step further - if I use the call file to call 10001 - it > answers - from the polycom I call 10002 - this works also - two > different sources I presume > > My question is can "in a call file" somehow - say I am a different source > or something ? > just like the two polycom phones that work - two different source > addresses or something. > > Anyone ran into this - or thoughts on something I might try to say the > calls are different sources ? > > Thank you. > > Jerry > Turns out simple setting the CALLERID to different values does the trick. Awesome! jerry
-- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- Check out the new Asterisk community forum at: https://community.asterisk.org/ New to Asterisk? Start here: https://wiki.asterisk.org/wiki/display/AST/Getting+Started asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users