On Jun 18, 2004, at 8:56 AM, Randy Bush wrote:
Err, it works for me, with a 7940 and 6.3. I've never bothered with
'NewCall' or 'Dial'; you can get around them if you can set up a decent
dialplan.xml.
aha. ok. thanks. on to sorting out a dialplan.xml. any simple one that sez "just give it all to asterisk?"
Here's mine. It's not terrifically complicated. If you remove everything but the last <TEMPLATE> line, then it'll timeout on everything after 5 seconds.
The single-digit lines are new; once I've had time to verify that they work, I'll remove the 425 and 206 entries. I'm obviously not using 'dial 9 for an outside line' here.
<DIALTEMPLATE> <TEMPLATE MATCH="22.." Timeout="0"/> <TEMPLATE MATCH="425......." Timeout="0"/> <TEMPLATE MATCH="206......." Timeout="0"/> <TEMPLATE MATCH="2........." Timeout="0"/> <TEMPLATE MATCH="3........." Timeout="0"/> <TEMPLATE MATCH="4........." Timeout="0"/> <TEMPLATE MATCH="5........." Timeout="0"/> <TEMPLATE MATCH="6........." Timeout="0"/> <TEMPLATE MATCH="7........." Timeout="0"/> <TEMPLATE MATCH="8........." Timeout="0"/> <TEMPLATE MATCH="9........." Timeout="0"/> <TEMPLATE MATCH="1.........." Timeout="0"/> <TEMPLATE MATCH="*" Timeout="5"/> </DIALTEMPLATE>
Scott
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
