You can connect two PRI devices together using a T1 crossover cable.
> from the zaptel sample config: > > # "dacs" : The zaptel driver cross connects the channels starting at > # the channel number listed at the end, after a colon > # "dacsrbs" : The zaptel driver cross connects the channels starting at > # the channel number listed at the end, after a colon and > # also performs the DACSing of RBS bits > > dacs=1-24:48 > dacsrbs=1-24:48 > > I've googled a little and not found much more than this. > > The question is: > > 1) what exactly does 1-24:48 mean in terms of this function. > > If I have two T1 interfaces and I want to literally just 'cross-connect' > the first to the second (channel 1 to channel 1, 2 to 2.... 24 to 24), > what > would the entry look like? > > 2) can you cross connect PRI interfaces? > > in other words can you use the dacs functionality to insert a digium card > (on a system running asterisk) in between a pri from a carrier, to a > legacy > pbx system? > > would you set the signalling as pri in this case (if you can even do > this), > or would you set it to something else and just pass the t1 as clear > channels and ignore the signalling as just another channel with data on > it. > > -Chris > > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users