Hi Jeff,

Have you tried defining the other three fxo ports in the zaptel.conf file and then go 
ahead and reference them in the zapata.conf file.  Maybe the zaptel drivers are not 
handling the intermediate tdm frames well.  Other than that, it looks like a problem 
with the 850.

Walker
On Tue, Jul 06, 2004 at 10:47:00PM -0500, [EMAIL PROTECTED] wrote:
> I've been working with an adtran ta 850 hooked to a t100p pretty much all
> day today, and I haven't gotten past configuring zaptel.conf and
> zapata.conf.  For some reason, when I pick up analog phone hooked up to
> the first module of a quad fxs card in the second slot of the ta 850,
> asterisk thinks that all four of the fxs modules in that card are going
> off hook.  If I pick up a phone hooked to module 2 of the same fxs card
> then asterisk (correctly) only sees that module go off hook.
> 
> When plugging a phone into any of the fxs pairs, I only get dial tone for
> a second or two and then I get silence.  However, I can still dial
> extensions and get through.  I'm not sure but maybe it is a config problem
> with the ta 850, as it takes a little more manual configuration than the
> ta 750 I worked with before.  Anybody have any pointers?
> 
> Here is the output on the console when I pick up a phone on module 1, and
> module 2, respectively:
> 
> [EMAIL PROTECTED]:~# asterisk -r
> Asterisk CVS-HEAD-07/06/04-12:37:58, Copyright (C) 1999-2004 Digium.
> Written by Mark Spencer <[EMAIL PROTECTED]>
> =========================================================================
> Connected to Asterisk CVS-HEAD-07/06/04-12:37:58 currently running on
> slack1 (pid = 702)
> - Remote UNIX connection
>     -- Starting simple switch on 'Zap/5-1'
>     -- Starting simple switch on 'Zap/6-1'
>     -- Starting simple switch on 'Zap/7-1'
>     -- Starting simple switch on 'Zap/8-1'
>     -- Hungup 'Zap/5-1'
>     -- Hungup 'Zap/6-1'
>     -- Hungup 'Zap/7-1'
>     -- Hungup 'Zap/8-1'
>     -- Starting simple switch on 'Zap/5-1'
> Jul  6 22:30:03 WARNING[163850]: chan_zap.c:1288 zt_set_hook: zt hook
> failed: Device or resource busy
> Jul  6 22:30:03 WARNING[163850]: chan_zap.c:1288 zt_set_hook: zt hook
> failed: Device or resource busy
>     -- Starting simple switch on 'Zap/6-1'
>     -- Starting simple switch on 'Zap/7-1'
> Jul  6 22:30:03 WARNING[163850]: chan_zap.c:1288 zt_set_hook: zt hook
> failed: Device or resource busy
>     -- Starting simple switch on 'Zap/8-1'
>     -- Hungup 'Zap/5-1'
>     -- Hungup 'Zap/6-1'
>     -- Hungup 'Zap/7-1'
>     -- Hungup 'Zap/8-1'
>     -- Starting simple switch on 'Zap/6-1'
>     -- Hungup 'Zap/6-1'
> 
> 
> Here is zaptel.conf:
> 
> span=1,0,0,esf,b8zs
> loadzone = us
> defaultzone=us
> fxsks=1
> fxoks=5-24
> 
> And here is zapata.conf:
> 
> [channels]
> transfer=yes
> 
> context=default
> 
> language = en
> usecallerid = no
> hidecallerid = no
> echocancel=yes
> echocancelwhenbridged=yes
> rxgain=0.0
> txgain=0.0
> immediate=no
> signalling=fxs_ks
> echotraining=yes
> 
> group = 0
> channel => 1
> 
> context=trusted
> group = 1
> 
> signalling = fxo_ks
> rxwink = 300
> 
> channel => 5-24
> 
> Any help appreciated,
> -Jeff
> _______________________________________________
> Asterisk-Users mailing list
> [EMAIL PROTECTED]
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users

-- 
********   DataCrest, Inc. -- Technically Superior   ******************
Walker Haddock                       http://www.datacrest.com
DataCrest, Inc.                    e-mail:  [EMAIL PROTECTED]
1634A Montgomery Hwy.    phone:  1-888-941-3282, 1-205-335-8589
Birmingham, AL 35216                  fax:  1-205-823-7838
***********************************************************************
_______________________________________________
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

Reply via email to