Roger, I haven't had any problems doing confs w/ g729. My guess is the Sipura is asking for ulaw first. Try adjusting the codec priority on the sipura side. IF you still have problems I an get my spa-3000 out and trying and solve it for you.
-- William ----- Original Message ----- From: box100 <[EMAIL PROTECTED]> Date: Mon, 6 Sep 2004 00:28:50 -0400 Subject: [Asterisk-Users] Asterisk Conferencing using g729 To: [EMAIL PROTECTED] Could anyone who has successfully configured Asterisk to use g729 to conference 10-20 people please post their configs. I purchased and successfully installed 2 g729 licenses and but when I dial into my conference number on the Asterisk box from a SPA-2000 set to allow all codecs, it always appears to connect using ULAW. My iax.conf file includes the following under the general section disallow=all bandwidth=low allow=g729 allow=ulaw Thanks, Roger Easlick _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users