No obvious cause for the failure yet but it feels like a bug that is revealed by a particular configuration organization.
Cheers, E. ————— Eliot Kimber, Owner Contrext, LLC http://contrext.com On 4/12/15, 12:19 PM, "Eliot Kimber" <ekim...@contrext.com> wrote: >It's definitely a function of my local .basex settings. If I revert to the >default settings (make the basex install dir .basexhome and remove >~/.basex) then the replace succeeds. > >Trying to figure out what the setting is that results in the failure. > >Cheers, > >E. >————— >Eliot Kimber, Owner >Contrext, LLC >http://contrext.com > > > > >On 4/12/15, 11:36 AM, "Eliot Kimber" <ekim...@contrext.com> wrote: > >>Using the basex Zip distribution for both 8.0.3 and 8.1, I'm getting a >>failure on REPLACE but not ADD for the same XML data. >> >>This command succeeds: >> >>basexclient -c "CHECK dfst_dfst-sample-project_master; OPEN >>dfst_dfst-sample-project_master; ADD to dfst/metadata.xml >><dfst_metadata/>" >> >> >>But this command fails >> >>basexclient -c "CHECK dfst_dfst-sample-project_master; OPEN >>dfst_dfst-sample-project_master; REPLACE dfst/metadata.xml >><dfst_metadata/>" >> >>"..." (Line 1): Premature end of file. >> >> >>This definitely worked in the past, so something must have changed on my >>system. >> >>Obviously, the error message is not very helpful in this case. >> >>Any idea what the problem might be or how I would diagnose this failure? >> >>Thanks, >> >>E. >> >>————— >>Eliot Kimber, Owner >>Contrext, LLC >>http://contrext.com >> >> >> >> > > >