Usually when turning on the light the sensor will kick on and turn off after a few minutes, unless you hit the switch twice quickly, and that will keep the light on until you turn off the switch. RJ ----- Original Message ----- From: Brice Mijares To: blindhandyman@yahoogroups.com Sent: Saturday, September 04, 2010 9:36 AM Subject: [BlindHandyMan] front porch light
Yesterday we pick up the correct light bulb for the front porch. I believe it was 40 watts as was suggested by the service a tenant. Came home and swamp them out. Turned the switch on and the light came on. This puzzled me as the censor should have known it was light out so the light shouldn't have came on. So we turned the switch off and turned it back on when it got dark. When my wife gets up it will be light and I'll have her check it to see if the light went off on it's own as it should have. I hope the censor didn't go bad. I can't see both the bulb and the censor going bad at the same time. So I'm perplexed at the moment. [Non-text portions of this message have been removed]