Hi James, Thanks for the reply. The ROACHes at the observatory are netbooted, and I do not have an SD card for booting, so would have to create one. I suppose I could clone the uboot system from the observatory to campus and try to set up tftp etc. -- that is pretty much what I intended to do using the instructions I had linked to, but my question is whether there are new instructions somewhere that I should use. It seems the answer is no, so I will proceed with the old instructions.
Thanks, Dale On Mon, Feb 4, 2019 at 5:37 AM James Smith <jsm...@ska.ac.za> wrote: > Hello Dale, > > Do you have any existing, functioning ROACH2 boards? Are they booting from > an SD card or from network? If it's a network card then it's a simple > matter to copy the one to the other, if from network then the most you may > need to do is update your dnsmasq.conf to assign an IP address to the new > ROACH2 (its MAC address should be the same as existing ones but the last > few digits reflect the serial number of the ROACH2). > > The instructions linked look as though they should work but AFAIK it's > been a while since anyone put in a new ROACH2 anywhere, so YMMV. At SKA, > we've mostly moved on to SKARAB. However, there's quite a bit of > organisational memory, so if you battle, just shout. > > Regards, > James > > > On Sun, Feb 3, 2019 at 8:51 PM Gary, Dale E. <dale.e.g...@njit.edu> wrote: > >> Hi All, >> >> We need to bring up a new ROACH2 board from scratch for the purpose of >> introducing students to the tools based on the Casper 2018 tutorials. >> Although I did all of this 3-4 years ago at our observatory, I need to >> refresh my memory, and I would like to take advantage of any new >> developments. Are the instructions (ca 2015) still correct as listed >> here: >> https://casper.ssl.berkeley.edu/wiki/ROACH-2_Revision_2#Updating_tcpborphserver_3_etc. >> ? If there are updated instructions, please let me know. >> >> Thanks, >> Dale Gary >> >> -- >> You received this message because you are subscribed to the Google Groups >> "casper@lists.berkeley.edu" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to casper+unsubscr...@lists.berkeley.edu. >> To post to this group, send email to casper@lists.berkeley.edu. >> > -- > You received this message because you are subscribed to the Google Groups " > casper@lists.berkeley.edu" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to casper+unsubscr...@lists.berkeley.edu. > To post to this group, send email to casper@lists.berkeley.edu. > -- You received this message because you are subscribed to the Google Groups "casper@lists.berkeley.edu" group. To unsubscribe from this group and stop receiving emails from it, send an email to casper+unsubscr...@lists.berkeley.edu. To post to this group, send email to casper@lists.berkeley.edu.