I'm thinking for straight through you meant to say: Straight through T1 you will need 11, 22, 44 and 55
wrote in message news:[EMAIL PROTECTED] > For a standard T1: > > Cross-over you will need 14 and 25 > Straight through T1 you will need 11, 22, 33 and 44 > > > > > Thanks, > > Mario Puras > SoluNet Technical Support > Mailto: [EMAIL PROTECTED] > Direct: (321) 309-1410 > 888.449.5766 (USA) / 888.SOLUNET (Canada) > > > > >-----Original Message----- > >From: [EMAIL PROTECTED] > >[mailto:[EMAIL PROTECTED] > >Sent: Wednesday, July 09, 2003 3:16 PM > >To: [EMAIL PROTECTED] > >Subject: does anyone know the pinout on a t1 cable bet/ a [7:72069] > > > > > >3660 & an ls1010...the interfaces on both are t1 > > > >thx in advance > >Report misconduct > >and Nondisclosure violations to [EMAIL PROTECTED] Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=72084&t=72069 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]