FYI, it's the same as a token-ring cross-over cable. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Wednesday, July 09, 2003 4:35 PM To: [EMAIL PROTECTED] Subject: RE: does anyone know the pinout on a t1 cable bet/ a [7:72069]
For a standard T1: Cross-over you will need 14 and 25 Straight through T1 you will need 11, 22, 33 and 44 Thanks, Mario Puras SoluNet Technical Support Mailto: [EMAIL PROTECTED] Direct: (321) 309-1410 888.449.5766 (USA) / 888.SOLUNET (Canada) >-----Original Message----- >From: [EMAIL PROTECTED] >[mailto:[EMAIL PROTECTED] >Sent: Wednesday, July 09, 2003 3:16 PM >To: [EMAIL PROTECTED] >Subject: does anyone know the pinout on a t1 cable bet/ a [7:72069] > > >3660 & an ls1010...the interfaces on both are t1 > >thx in advance >Report misconduct >and Nondisclosure violations to [EMAIL PROTECTED] Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=72506&t=72069 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
