Ok I've got a few basic commands like genmove working, however I'm having trouble guessing the response format gogui is expecting for an analyze command I defined. I'm trying to display board influence by defining my own "dboard" command. My analyze config file has the following line: dboard/Influence/influence This shows up successfully on the gogui analyze menu, however gogui is complaining about the response my program is sending it. Here is a sample from the shell:
influence = A1 0.3 A2 -0.5 A3 0.0 A4 0.3 A5 0.1 A6 0.5 A7 0.3 A8 -0.3 A9 -1.0 A10 -0.6 A11 -0.8 A12 -0.7 A13 0.2 A14 0.5 A15 -0.2 A16 -0.2 A17 -0.3 A18 -0.2 A19 0.9 B1 -0.8 B2 -0.9 B3 -0.1 B4 0.0 B5 0.8 B6 0.6 B7 0.6 B8 0.6 B9 -0.7 B10 -0.6 B11 -0.4 B12 0.2 B13 0.4 B14 -0.0 B15 0.1 B16 0.4 B17 0.0 B18 0.8 B19 -0.2 C1 -0.7 C2 0.8 C3 -0.8 C4 -0.5 C5 -0.9 C6 -0.6 C7 0.4 C8 -0.5 C9 0.8 C10 0.6 C11 0.0 C12 -0.5 C13 0.6 C14 -0.9 C15 0.3 C16 0.1 C17 -0.0 C18 0.6 C19 -0.6 D1 0.4 D2 0.7 D3 0.7 D4 -0.4 D5 -0.2 D6 0.6 D7 -0.3 D8 0.1 D9 -0.1 D10 -0.4 D11 0.7 D12 0.9 D13 0.1 D14 0.7 D15 -0.5 D16 -0.4 D17 0.3 D18 -0.9 D19 0.5 E1 -0.2 E2 -0.8 E3 -0.7 E4 0.2 E5 0.5 E6 0.2 E7 -0.0 E8 0.8 E9 -0.7 E10 0.9 E11 -1.0 E12 -0.2 E13 0.1 E14 -0.2 E15 0.9 E16 -0.7 E17 0.1 E18 -0.6 E19 -0.7 F1 0.3 F2 0.1 F3 0.2 F4 -0.1 F5 0.6 F6 -0.3 F7 -0.9 F8 0.4 F9 -0.7 F10 1.0 F11 -0.1 F12 -0.0 F13 0.3 F14 1.0 F15 -0.6 F16 -0.1 F17 0.2 F18 -0.8 F19 0.6 G1 0.3 G2 0.3 G3 -0.5 G4 -0.1 G5 0.5 G6 0.5 G7 -0.6 G8 -0.5 G9 -0.7 G10 -0.4 G11 0.0 G12 -0.5 G13 0.1 G14 -0.6 G15 0.8 G16 0.9 G17 -0.2 G18 -1.0 G19 0.9 H1 -0.9 H2 -0.3 H3 0.9 H4 0.0 H5 0.1 H6 -0.2 H7 0.9 H8 0.5 H9 0.7 H10 -0.3 H11 0.6 H12 0.1 H13 -0.8 H14 0.1 H15 0.0 H16 -0.6 H17 -0.6 H18 -0.5 H19 0.7 J1 -0.9 J2 0.9 J3 -0.7 J4 -0.4 J5 0.5 J6 0.8 J7 0.3 J8 -0.2 J9 0.2 J10 0.9 J11 0.3 J12 1.0 J13 0.3 J14 0.9 J15 0.8 J16 0.5 J17 -0.8 J18 0.6 J19 0.3 K1 0.4 K2 -0.1 K3 -0.7 K4 0.0 K5 -0.3 K6 1.0 K7 0.3 K8 0.1 K9 0.1 K10 1.0 K11 -0.1 K12 0.6 K13 0.5 K14 0.0 K15 0.8 K16 -0.5 K17 0.1 K18 -0.7 K19 -0.4 L1 0.8 L2 -0.0 L3 -0.8 L4 0.6 L5 -0.6 L6 0.7 L7 -0.6 L8 -0.6 L9 -0.4 L10 -0.9 L11 0.2 L12 -0.4 L13 1.0 L14 0.2 L15 -0.4 L16 0.4 L17 0.5 L18 -0.3 L19 -0.0 M1 0.6 M2 0.5 M3 -0.7 M4 0.7 M5 -0.7 M6 0.0 M7 0.4 M8 -0.3 M9 -0.7 M10 0.8 M11 -0.1 M12 0.5 M13 0.3 M14 0.3 M15 -0.9 M16 0.7 M17 -0.2 M18 -0.4 M19 -0.2 N1 0.8 N2 -0.5 N3 -0.2 N4 -0.5 N5 -0.1 N6 -0.7 N7 0.3 N8 0.7 N9 -0.2 N10 -0.3 N11 -0.3 N12 -0.2 N13 -0.6 N14 0.7 N15 0.4 N16 -0.6 N17 0.5 N18 0.9 N19 -0.5 O1 0.7 O2 0.2 O3 -0.8 O4 0.4 O5 -0.2 O6 -0.2 O7 -0.3 O8 -0.3 O9 -0.9 O10 -0.1 O11 -0.9 O12 0.5 O13 -0.7 O14 0.2 O15 -0.7 O16 0.1 O17 0.4 O18 0.9 O19 -0.3 P1 0.4 P2 -0.0 P3 0.8 P4 0.3 P5 -0.4 P6 0.7 P7 -0.9 P8 0.4 P9 -0.8 P10 -0.4 P11 0.7 P12 0.9 P13 0.3 P14 0.1 P15 0.1 P16 0.7 P17 0.7 P18 -0.3 P19 -0.9 Q1 0.6 Q2 0.0 Q3 0.0 Q4 -0.6 Q5 0.9 Q6 1.0 Q7 0.9 Q8 -0.5 Q9 0.4 Q10 -0.6 Q11 -0.3 Q12 -0.0 Q13 0.8 Q14 0.6 Q15 -0.6 Q16 -0.6 Q17 1.0 Q18 0.1 Q19 -0.4 R1 -0.3 R2 0.3 R3 0.3 R4 -0.4 R5 -0.4 R6 -0.7 R7 -0.5 R8 0.4 R9 0.1 R10 0.3 R11 0.0 R12 0.6 R13 0.8 R14 0.2 R15 -0.0 R16 -0.2 R17 -1.0 R18 -0.8 R19 0.4 S1 0.9 S2 -0.8 S3 -0.3 S4 -0.3 S5 0.6 S6 -0.0 S7 0.4 S8 0.1 S9 0.3 S10 0.1 S11 -0.3 S12 -0.6 S13 -0.1 S14 1.0 S15 0.7 S16 -0.4 S17 -0.7 S18 0.1 S19 0.2 T1 -0.9 T2 -0.6 T3 0.3 T4 0.0 T5 -0.6 T6 0.2 T7 -0.1 T8 0.1 T9 -0.9 T10 0.7 T11 0.8 T12 0.6 T13 0.6 T14 -0.4 T15 0.8 T16 0.7 T17 -0.4 T18 0.1 T19 0.9 looking at the michi-c code it seems like they are using the same format? What am I missing? Also thanks so much for the help!
_______________________________________________ Computer-go mailing list Computer-go@computer-go.org http://computer-go.org/mailman/listinfo/computer-go
