Package: installation-reports Version: 2.11 Severity: important
-- Package-specific info: Boot method: CD Image version: http://cdimage.debian.org/cdimage/daily-builds/daily/arch-latest/hppa/iso-cd/debian-testing-hppa-netinst.iso Date: 28/01/2006 Machine: HP Visualize B2000 Partitions: Disk /dev/sda: 9104 MB, 9104953344 bytes 255 heads, 63 sectors/track, 1106 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sda1 * 1 4 32098+ f0 Linux/PA-RISC boot /dev/sda2 5 8 32130 83 Linux /dev/sda3 9 1106 8819685 5 Extended /dev/sda5 434 464 248976 82 Linux swap / Solaris /dev/sda6 465 1106 5156833+ 83 Linux /dev/sda7 9 433 3413749+ 83 Linux Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot: [0] Detect network card: [0] Configure network: [0] Detect CD: [0] Load installer modules: [0] Detect hard drives: [0] Partition hard drives: [0] Create file systems: [0] Mount partitions: [0] Install base system: [E] Install boot loader: [0] Installed system ok: [0] Comments/Problems: Some comments regarding partitionning: I notice that xfs filesystem is unusable during installation, i've found in the log file those lines: Jan 28 20:55:24 modprobe: FATAL: Error inserting xfs (/lib/modules/2.6.14-2-parisc/kernel/fs/xfs/xfs.ko): Invalid module format Jan 28 20:55:24 kernel: module xfs relocation of symbol freeze_bdev is out of range (0x3ffeffda in 17 bits) The critical point is the base-system installation, it fails due to dependency problems with aptitude and tasksel. Aptitude fails to install because libapt-pkg-libc6.3-6-3.10 and libsigc++-2.0-0c2 are not available in testing nor in unstable. And tasksel depends on aptitude. To install, i had to install a sarge system (which also fails on setting up apt after the base-system installation). -- Please make sure that the hardware-summary log file, and any other installation logs that you think would be useful are attached to this report. Once you have filled out this report, mail it to [EMAIL PROTECTED] ============================================== Installer lsb-release file: ============================================== DISTRIB_ID=Debian DISTRIB_DESCRIPTION="Debian GNU/Linux installer" DISTRIB_RELEASE="3.1 (installer build 20060108)" ============================================== Hardware information for installed system: ============================================== umame -a: Linux luke 2.6.14-2-parisc #2 Wed Dec 21 18:22:11 UTC 2005 parisc unknown lspci -v -t: -+-[01]---00.0 Hewlett-Packard Company Visualize FXe lspci -v -t: \-[00]-+-0c.0 Digital Equipment Corporation DECchip 21142/43 lspci -v -t: +-0d.0 Analog Devices AD1889 sound chip lspci -v -t: +-0e.0 National Semiconductor Corporation 87415/87560 IDE lspci -v -t: +-0e.1 National Semiconductor Corporation 87560 Legacy I/O lspci -v -t: +-0e.2 National Semiconductor Corporation USB Controller lspci -v -t: \-0f.0 LSI Logic / Symbios Logic 53c895a lspci -n: 0000:00:0c.0 0200: 1011:0019 (rev 41) lspci -n: 0000:00:0d.0 0401: 11d4:1889 lspci -n: 0000:00:0e.0 0101: 100b:0002 (rev 03) lspci -n: 0000:00:0e.1 0680: 100b:000e (rev 01) lspci -n: 0000:00:0e.2 0c03: 100b:0012 (rev 02) lspci -n: 0000:00:0f.0 0100: 1000:0012 (rev 01) lspci -n: 0000:01:00.0 0302: 103c:108b (rev 03) lspci -v: 0000:00:0c.0 Ethernet controller: Digital Equipment Corporation DECchip 21142/43 (rev 41) lspci -v: Subsystem: Hewlett-Packard Company: Unknown device 104f lspci -v: Flags: bus master, medium devsel, latency 255, IRQ 65 lspci -v: I/O ports at 0f00 [size=128] lspci -v: Memory at f4005000 (32-bit, non-prefetchable) [size=1K] lspci -v: Expansion ROM at f4040000 [disabled] [size=256K] lspci -v: lspci -v: 0000:00:0d.0 Multimedia audio controller: Analog Devices AD1889 sound chip lspci -v: Subsystem: Analog Devices AD1889 sound chip lspci -v: Flags: bus master, medium devsel, latency 255, IRQ 66 lspci -v: Memory at f4009000 (32-bit, prefetchable) [size=512] lspci -v: Memory at f4008000 (32-bit, prefetchable) [size=16] lspci -v: Memory at f4007000 (32-bit, prefetchable) [size=16] lspci -v: Memory at f4006000 (32-bit, prefetchable) [size=16] lspci -v: Capabilities: [dc] Power Management version 1 lspci -v: lspci -v: 0000:00:0e.0 IDE interface: National Semiconductor Corporation 87415/87560 IDE (rev 03) (prog-if 8f [Master SecP SecO PriP PriO]) lspci -v: Flags: bus master, medium devsel, latency 255, IRQ 7 lspci -v: I/O ports at 0e00 [size=8] lspci -v: I/O ports at 0d00 [size=4] lspci -v: I/O ports at 0b00 [size=8] lspci -v: I/O ports at 0a00 [size=4] lspci -v: I/O ports at 0900 [size=16] lspci -v: lspci -v: 0000:00:0e.1 Bridge: National Semiconductor Corporation 87560 Legacy I/O (rev 01) lspci -v: Flags: bus master, medium devsel, latency 255, IRQ 67 lspci -v: lspci -v: 0000:00:0e.2 USB Controller: National Semiconductor Corporation USB Controller (rev 02) (prog-if 10) lspci -v: Flags: bus master, medium devsel, latency 240, IRQ 1 lspci -v: Memory at f4004000 (32-bit, non-prefetchable) [size=4K] lspci -v: Memory at f4003000 (32-bit, non-prefetchable) [size=4K] lspci -v: lspci -v: 0000:00:0f.0 SCSI storage controller: LSI Logic / Symbios Logic 53c895a (rev 01) lspci -v: Subsystem: LSI Logic / Symbios Logic: Unknown device 1000 lspci -v: Flags: bus master, medium devsel, latency 255, IRQ 68 lspci -v: I/O ports at 0800 [size=256] lspci -v: Memory at f4002000 (32-bit, non-prefetchable) [size=1K] lspci -v: Memory at f4000000 (32-bit, non-prefetchable) [size=8K] lspci -v: Capabilities: [40] Power Management version 2 lspci -v: lspci -v: 0000:01:00.0 3D controller: Hewlett-Packard Company Visualize FXe (rev 03) lspci -v: Subsystem: Hewlett-Packard Company: Unknown device 108c lspci -v: Flags: bus master, 66MHz, medium devsel, latency 255, IRQ 69 lspci -v: Memory at fb000000 (64-bit, prefetchable) [size=16M] lspci -v: Memory at fa000000 (64-bit, non-prefetchable) [size=16M] lspci -v: Expansion ROM at f4800000 [disabled] [size=128K] lspci -v: lspci -x: 0000:00:0c.0 Ethernet controller: Digital Equipment Corporation DECchip 21142/43 (rev 41) lspci -x: 00: 11 10 19 00 57 01 80 02 41 00 00 02 10 ff 00 00 lspci -x: 10: 01 0f 00 00 00 50 00 f4 00 00 00 00 00 00 00 00 lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 4f 10 lspci -x: 30: 00 00 04 f4 00 00 00 00 00 00 00 00 02 01 14 28 lspci -x: lspci -x: 0000:00:0d.0 Multimedia audio controller: Analog Devices AD1889 sound chip lspci -x: 00: d4 11 89 18 46 01 90 02 00 00 01 04 00 ff 00 00 lspci -x: 10: 08 90 00 f4 08 80 00 f4 08 70 00 f4 08 60 00 f4 lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 d4 11 89 18 lspci -x: 30: 00 00 00 00 dc 00 00 00 00 00 00 00 03 01 01 ff lspci -x: lspci -x: 0000:00:0e.0 IDE interface: National Semiconductor Corporation 87415/87560 IDE (rev 03) lspci -x: 00: 0b 10 02 00 55 01 00 02 03 8f 01 01 10 ff 80 00 lspci -x: 10: 01 0e 00 00 01 0d 00 00 01 0b 00 00 01 0a 00 00 lspci -x: 20: 01 09 00 00 00 00 00 00 00 00 00 00 00 00 00 00 lspci -x: 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 lspci -x: lspci -x: 0000:00:0e.1 Bridge: National Semiconductor Corporation 87560 Legacy I/O (rev 01) lspci -x: 00: 0b 10 0e 00 47 01 00 02 01 00 80 06 10 ff 80 00 lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 lspci -x: 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 lspci -x: lspci -x: 0000:00:0e.2 USB Controller: National Semiconductor Corporation USB Controller (rev 02) lspci -x: 00: 0b 10 12 00 57 01 00 02 02 10 03 0c 00 f0 80 00 lspci -x: 10: 00 40 00 f4 00 30 00 f4 00 00 00 00 00 00 00 00 lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 lspci -x: 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 04 00 00 lspci -x: lspci -x: 0000:00:0f.0 SCSI storage controller: LSI Logic / Symbios Logic 53c895a (rev 01) lspci -x: 00: 00 10 12 00 57 01 10 02 01 00 00 01 10 ff 00 00 lspci -x: 10: 01 08 00 00 00 20 00 f4 00 00 00 f4 00 00 00 00 lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 10 00 10 lspci -x: 30: 00 00 00 00 40 00 00 00 00 00 00 00 01 01 11 40 lspci -x: lspci -x: 0000:01:00.0 3D controller: Hewlett-Packard Company Visualize FXe (rev 03) lspci -x: 00: 3c 10 8b 10 46 00 a0 02 03 00 02 03 00 ff 00 00 lspci -x: 10: 0c 00 00 fb 00 00 00 00 04 00 00 fa 00 00 00 00 lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 8c 10 lspci -x: 30: 00 00 80 f4 00 00 00 00 00 00 00 00 00 01 00 00 lspci -x: lsmod: Module Size Used by lsmod: exportfs 6944 0 lsmod: ext3 178824 2 lsmod: jbd 72436 1 ext3 lsmod: zalon7xx 42864 0 lsmod: lasi700 3840 0 lsmod: 53c700 36364 1 lasi700 lsmod: lasi_82596 29908 0 lsmod: isofs 44280 0 lsmod: ide_cd 50500 0 lsmod: cdrom 45852 1 ide_cd lsmod: ide_disk 22848 0 lsmod: ide_generic 1216 0 [permanent] lsmod: cmd64x 14236 0 [permanent] lsmod: sd_mod 21680 5 lsmod: usbhid 44004 0 lsmod: usbkbd 8384 0 lsmod: ohci_hcd 37700 0 lsmod: sym53c8xx 96948 4 lsmod: scsi_transport_spi 30272 3 zalon7xx,53c700,sym53c8xx lsmod: usbcore 138900 3 usbhid,usbkbd,ohci_hcd lsmod: scsi_mod 168196 6 zalon7xx,lasi700,53c700,sd_mod,sym53c8xx,scsi_transport_spi lsmod: ns87415 5956 0 [permanent] lsmod: ide_core 142416 5 ide_cd,ide_disk,ide_generic,cmd64x,ns87415 lsmod: tulip 64604 0 df: Filesystem 1k-blocks Used Available Use% Mounted on df: tmpfs 102400 25668 76732 25% / df: tmpfs 255732 436 255296 0% /dev df: tmpfs 255732 436 255296 0% /dev df: tmpfs 255732 436 255296 0% /.dev df: /dev/scsi/host0/bus0/target6/lun0/part7 3360124 218132 3107856 7% /target df: /dev/scsi/host0/bus0/target6/lun0/part2 30107 10689 19097 36% /target/boot df: /dev/scsi/host0/bus0/target6/lun0/part6 5075808 230672 4793568 5% /target/var free: total used free shared buffers free: Mem: 511468 338612 172856 0 17260 free: Swap: 248968 0 248968 free: Total: 760436 338612 421824 cardctl status: /usr/bin/report-hw: 32: cardctl: not found cardctl ident: /usr/bin/report-hw: 33: cardctl: not found /proc/cpuinfo: processor : 0 /proc/cpuinfo: cpu family : PA-RISC 2.0 /proc/cpuinfo: cpu : PA8600 (PCX-W+) /proc/cpuinfo: cpu MHz : 400.000000 /proc/cpuinfo: model : 9000/785/B2000 /proc/cpuinfo: model name : Kazoo W+ /proc/cpuinfo: hversion : 0x00005d00 /proc/cpuinfo: sversion : 0x00000481 /proc/cpuinfo: I-cache : 512 KB /proc/cpuinfo: D-cache : 1024 KB (WB, 0-way associative) /proc/cpuinfo: ITLB entries : 160 /proc/cpuinfo: DTLB entries : 160 - shared with ITLB /proc/cpuinfo: BTLB : not supported /proc/cpuinfo: bogomips : 799.53 /proc/cpuinfo: software id : 2010833216 /proc/cpuinfo: /proc/ioports: 00000000-00001fff : PCI00 Ports /proc/ioports: 00000020-0000003e : pic1 /proc/ioports: 000000a0-000000be : pic2 /proc/ioports: 000007e0-000007fe : acpi /proc/ioports: 00000800-000008ff : sym53c8xx /proc/ioports: 00000900-00000907 : ide0 /proc/ioports: 00000908-0000090f : ide1 /proc/ioports: 00000d02-00000d02 : ide0 /proc/ioports: 00000e00-00000e07 : ide0 /proc/ioports: 00000f00-00000f7f : tulip /proc/ioports: 00012000-00013fff : PCI01 Ports /proc/iomem: 00000000-1fffffff : System RAM /proc/iomem: 00000000-000009ff : PDC data (Page Zero) /proc/iomem: 00100000-0034ffff : Kernel code /proc/iomem: 00350000-0045a7af : Kernel data /proc/iomem: f05d0000-f05d0000 : lcd_data /proc/iomem: f05d0008-f05d0008 : lcd_cmd /proc/iomem: f4000000-f47fffff : PCI00 LMMIO /proc/iomem: f4000000-f4001fff : sym53c8xx /proc/iomem: f4002000-f40023ff : sym53c8xx /proc/iomem: f4004000-f4004fff : ohci_hcd /proc/iomem: f4005000-f40053ff : tulip /proc/iomem: f4800000-f4ffffff : PCI01 LMMIO /proc/iomem: fa000000-fbffffff : PCI01 ELMMIO /proc/iomem: fed00000-fed00fff : 10 /proc/iomem: fed30000-fed30fff : 10:0 /proc/iomem: fed32000-fed32fff : 10:1 /proc/iomem: fef00000-feffffff : Astro Intr Ack /proc/iomem: fff80000-fffaffff : Central Bus /proc/iomem: fffa0000-fffa0fff : 32 /proc/iomem: fffb0000-fffdffff : Local Broadcast /proc/iomem: fffe0000-ffffffff : Global Broadcast /proc/interrupts: CPU0 /proc/interrupts: 1: 7623 SuperIO ohci_hcd:usb1 /proc/interrupts: 7: 6486 SuperIO ide0 /proc/interrupts: 64: 331399 CPU timer /proc/interrupts: 65: 113580 IO-SAPIC-level eth0 /proc/interrupts: 67: 14666 IO-SAPIC-level SuperIO /proc/interrupts: 68: 36008 IO-SAPIC-level sym53c8xx /proc/meminfo: MemTotal: 511468 kB /proc/meminfo: MemFree: 172856 kB /proc/meminfo: Buffers: 17260 kB /proc/meminfo: Cached: 280872 kB /proc/meminfo: SwapCached: 0 kB /proc/meminfo: Active: 245436 kB /proc/meminfo: Inactive: 64140 kB /proc/meminfo: HighTotal: 0 kB /proc/meminfo: HighFree: 0 kB /proc/meminfo: LowTotal: 511468 kB /proc/meminfo: LowFree: 172856 kB /proc/meminfo: SwapTotal: 248968 kB /proc/meminfo: SwapFree: 248968 kB /proc/meminfo: Dirty: 9640 kB /proc/meminfo: Writeback: 0 kB /proc/meminfo: Mapped: 12668 kB /proc/meminfo: Slab: 23672 kB /proc/meminfo: CommitLimit: 504700 kB /proc/meminfo: Committed_AS: 49160 kB /proc/meminfo: PageTables: 376 kB /proc/meminfo: VmallocTotal: 245728 kB /proc/meminfo: VmallocUsed: 1652 kB /proc/meminfo: VmallocChunk: 243800 kB /proc/bus/input/devices: I: Bus=0003 Vendor=047b Product=0002 Version=0120 /proc/bus/input/devices: N: Name="SILITEK USB Keyboard and Mouse" /proc/bus/input/devices: P: Phys=usb-0000:00:0e.2-1/input0 /proc/bus/input/devices: H: Handlers=kbd /proc/bus/input/devices: B: EV=120003 /proc/bus/input/devices: B: KEY=7 ff87207a c14057ff febeffdf ffefffff ffffffff fffffffe /proc/bus/input/devices: B: LED=1f /proc/bus/input/devices: /proc/bus/input/devices: I: Bus=0003 Vendor=047b Product=0002 Version=0120 /proc/bus/input/devices: N: Name="SILITEK USB Keyboard and Mouse" /proc/bus/input/devices: P: Phys=usb-0000:00:0e.2-1/input1 /proc/bus/input/devices: H: Handlers=kbd mouse0 /proc/bus/input/devices: B: EV=7 /proc/bus/input/devices: B: KEY=7001f 0 0 0 c000 100000 0 0 0 /proc/bus/input/devices: B: REL=103 /proc/bus/input/devices: /proc/bus/input/devices: I: Bus=0003 Vendor=046d Product=c000 Version=0401 /proc/bus/input/devices: N: Name="Logitech N43" /proc/bus/input/devices: P: Phys=usb-0000:00:0e.2-2/input0 /proc/bus/input/devices: H: Handlers=mouse1 /proc/bus/input/devices: B: EV=7 /proc/bus/input/devices: B: KEY=70000 0 0 0 0 0 0 0 0 /proc/bus/input/devices: B: REL=3 /proc/bus/input/devices: dmidecode: /usr/bin/report-hw: 41: dmidecode: not found ============================================== Installer status file: ============================================== Package: usb-modules-2.6.14-2-parisc-di Status: install ok unpacked Version: 1.4 Provides: usb-modules Depends: kernel-image-2.6.14-2-parisc-di Description: USB support Package: preseed-common Status: install ok unpacked Version: 1.11 Depends: di-utils (>= 1.14) Description: common files for preseeding Package: udpkg Status: install ok unpacked Version: 1.03 Depends: libc6 (>= 2.3.5-1), libdebian-installer4 (>= 0.35) Description: tiny dpkg clone Package: localechooser Status: install ok installed Version: 0.28 Depends: cdebconf-udeb, iso-3166-udeb, di-utils (>= 1.15) Description: choose language/country/locale Installer-Menu-Item: 10 Package: libnss-dns-udeb Status: install ok unpacked Version: 2.3.5-11 Description: GNU C Library: NSS helper for DNS - udeb Package: ide-modules-2.6.14-2-parisc-di Status: install ok unpacked Version: 1.4 Provides: ide-modules Depends: kernel-image-2.6.14-2-parisc-di Description: IDE drivers Package: cdrom-checker Status: install ok unpacked Version: 1.05 Depends: cdrom-detect, cdebconf-udeb (>= 0.31) Description: Verify the cd contents Installer-Menu-Item: 940 Package: lowmemcheck Status: install ok unpacked Version: 1.12 Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03) Description: detect low-memory systems and enter lowmem mode Package: console-keymaps-usb Status: install ok installed Version: 2002.12.04dbs-52 Provides: console-keymaps Depends: cdebconf-udeb Description: Keymaps for USB keyboards Package: cdrom-retriever Status: install ok installed Version: 1.07 Provides: retriever Depends: cdrom-detect Description: Fetch modules from a CDROM Package: main-menu Status: install ok unpacked Version: 1.09 Depends: libc6 (>= 2.3.5-1), libdebconfclient0, libdebian-installer4 (>= 0.35) Description: Debian installer main menu Package: di-utils-shell Status: install ok unpacked Version: 1.22 Depends: cdebconf-udeb (>= 0.73), di-utils (>= 1.18) Description: Execute a shell Installer-Menu-Item: 950 Package: input-modules-2.6.14-2-parisc64-di Status: install ok unpacked Version: 1.4 Provides: input-modules Depends: kernel-image-2.6.14-2-parisc64-di, usb-modules-2.6.14-2-parisc64-di Description: Input devices support Package: di-utils Status: install ok installed Version: 1.22 Depends: libc6 (>= 2.3.5-1), libdebian-installer4 (>= 0.36) Description: Miscellaneous utilities for the debian installer Package: nic-modules-2.6.14-2-parisc64-di Status: install ok unpacked Version: 1.4 Provides: nic-modules Depends: kernel-image-2.6.14-2-parisc64-di Description: Common NIC drivers Package: cdebconf-newt-udeb Status: install ok unpacked Version: 0.93 Depends: cdebconf-udeb, di-utils-terminfo, libc6 (>= 2.3.5-1), libnewt0.51 Description: Newt frontend for Debian Configuration Management System Package: module-init-tools-udeb Status: install ok unpacked Version: 3.2.2-1 Depends: libc6 (>= 2.3.5-1) Description: tools for managing Linux kernel modules Package: rootskel Status: install ok installed Version: 1.28 Description: Skeleton root filesystem used by debian-installer Package: udev-udeb Status: install ok unpacked Version: 0.079-1 Depends: libc6 (>= 2.3.5-1) Description: /dev/ and hotplug management daemon Package: cdrom-core-modules-2.6.14-2-parisc64-di Status: install ok unpacked Version: 1.4 Provides: cdrom-core-modules Depends: kernel-image-2.6.14-2-parisc64-di, ide-modules-2.6.14-2-parisc64-di Description: CDROM support Package: libfribidi0-udeb Status: install ok unpacked Version: 0.10.7-1 Depends: libc-udeb Description: Free Implementation of the Unicode BiDi algorithm Package: nic-modules-2.6.14-2-parisc-di Status: install ok unpacked Version: 1.4 Provides: nic-modules Depends: kernel-image-2.6.14-2-parisc-di Description: Common NIC drivers Package: rescue-check Status: install ok unpacked Version: 1.0 Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03), di-utils (>= 1.18) Description: enter d-i rescue mode if requested Package: nano-udeb Status: install ok unpacked Version: 1.3.10-1 Provides: editor Depends: libc-udeb, libslang2-udeb Description: free Pico clone with some new features - tiny build Package: cdrom-core-modules-2.6.14-2-parisc-di Status: install ok unpacked Version: 1.4 Provides: cdrom-core-modules Depends: kernel-image-2.6.14-2-parisc-di, ide-modules-2.6.14-2-parisc-di Description: CDROM support Package: usb-storage-modules-2.6.14-2-parisc-di Status: install ok unpacked Version: 1.4 Provides: usb-storage-modules Depends: ide-modules-2.6.14-2-parisc-di, scsi-modules-2.6.14-2-parisc-di, usb-modules-2.6.14-2-parisc-di Description: USB storage support Package: usb-modules-2.6.14-2-parisc64-di Status: install ok unpacked Version: 1.4 Provides: usb-modules Depends: kernel-image-2.6.14-2-parisc64-di Description: USB support Package: load-cdrom Status: install ok installed Version: 1.07 Depends: cdrom-retriever, anna (>= 1.07) Description: Load installer components from CD Installer-Menu-Item: 14 Package: cdebconf-text-udeb Status: install ok unpacked Version: 0.93 Depends: cdebconf-udeb, libc6 (>= 2.3.5-1) Description: Plain text frontend for Debian Configuration Management System Package: iso-3166-udeb Status: install ok installed Version: 0.49-1 Description: provides iso_3166.tab file Package: floppy-retriever Status: install ok unpacked Version: 1.07 Provides: retriever Depends: mountfloppy Description: Fetches modules from a floppy Package: busybox-udeb Status: install ok unpacked Version: 1:1.01-4 Depends: libc6 (>= 2.3.5-1) Description: Tiny utilities for the debian-installer Package: initrd-preseed Status: install ok unpacked Version: 1.11 Depends: preseed-common Description: load debconf preseed file from /preseed.cfg on the initrd Package: usb-storage-modules-2.6.14-2-parisc64-di Status: install ok unpacked Version: 1.4 Provides: usb-storage-modules Depends: ide-modules-2.6.14-2-parisc64-di, scsi-modules-2.6.14-2-parisc64-di, usb-modules-2.6.14-2-parisc64-di Description: USB storage support Package: archdetect Status: install ok installed Version: 1.32 Depends: libc6 (>= 2.3.5-1), libdebian-installer4 (>= 0.36) Description: Hardware architecture detector Package: save-logs Status: install ok unpacked Version: 2.10 Description: save logs and configuration for debug purposes Installer-Menu-Item: 940 Package: di-utils-reboot Status: install ok unpacked Version: 1.22 Description: Reboot Installer-Menu-Item: 995 Package: anna Status: install ok installed Version: 1.20 Depends: cdebconf-udeb Description: anna's not nearly apt, but for the Debian installer, it will do Package: pciutils-udeb Status: install ok unpacked Version: 1:2.1.11-15.3 Depends: libc6 (>= 2.3.5-1) Description: Linux PCI Utilities (udeb) Package: console-keymaps-at Status: install ok installed Version: 2002.12.04dbs-52 Provides: console-keymaps Depends: cdebconf-udeb Description: Keymaps for PC-style (PS/2 and AT) keyboards Package: di-utils-terminfo Status: install ok unpacked Version: 1.22 Description: Terminfo entries needed by newt/slang in debian installer Package: hw-detect Status: install ok installed Version: 1.32 Depends: rootskel (>= 0.54), archdetect, cdebconf-udeb (>= 0.75), di-utils (>= 1.15) Description: Detect hardware and load kernel drivers for it Package: kbd-chooser Status: install ok installed Version: 1.22 Depends: libc6 (>= 2.3.5-1), libdebconfclient0, libdebian-installer4 (>= 0.36), console-keymaps Description: Detect a keyboard and select layout Installer-Menu-Item: 12 Package: libdebian-installer4-udeb Status: install ok installed Version: 0.36 Provides: libdebian-installer4 Depends: libc6 (>= 2.3.5-1) Description: Library of common debian-installer functions Package: kernel-image-2.6.14-2-parisc-di Status: install ok unpacked Version: 1.4 Provides: kernel-image, ext2-modules Description: Linux kernel binary image for the Debian installer Package: installation-locale Status: install ok unpacked Version: 1.0 Depends: rootskel Description: UTF-8 C locale Package: ide-modules-2.6.14-2-parisc64-di Status: install ok unpacked Version: 1.4 Provides: ide-modules Depends: kernel-image-2.6.14-2-parisc64-di Description: IDE drivers Package: env-preseed Status: install ok unpacked Version: 1.11 Description: debconf preseeding via environment variables Package: mountfloppy Status: install ok unpacked Version: 0.4 Depends: di-utils (>= 1.15) Description: Mounts a floppy Package: cdebconf-priority Status: install ok unpacked Version: 0.93 Depends: cdebconf-udeb Description: Change debconf priority Installer-Menu-Item: 930 Package: file-preseed Status: install ok unpacked Version: 1.11 Depends: di-utils, preseed-common Description: load debconf preseed file Installer-Menu-Item: 14 Package: scsi-modules-2.6.14-2-parisc64-di Status: install ok unpacked Version: 1.4 Provides: scsi-modules Depends: kernel-image-2.6.14-2-parisc64-di, cdrom-core-modules-2.6.14-2-parisc64-di Description: SCSI drivers Package: input-modules-2.6.14-2-parisc-di Status: install ok unpacked Version: 1.4 Provides: input-modules Depends: kernel-image-2.6.14-2-parisc-di, usb-modules-2.6.14-2-parisc-di Description: Input devices support Package: kernel-image-2.6.14-2-parisc64-di Status: install ok unpacked Version: 1.4 Provides: kernel-image, ext2-modules Description: Linux kernel binary image for the Debian installer Package: libdebconfclient0-udeb Status: install ok installed Version: 0.93 Provides: libdebconfclient0 Depends: libc6 (>= 2.3.5-1), cdebconf-udeb Description: Debian Configuration Management System (C-implementation) Package: bogl-bterm-udeb Status: install ok unpacked Version: 0.1.18-1.4 Provides: editor Depends: libc-udeb Description: Ben's Own Graphics Library - graphical terminal Package: cdrom-detect Status: install ok installed Version: 1.11 Depends: hw-detect, di-utils (>= 1.15) Description: Detect CDROM devices and mount the CD Installer-Menu-Item: 14 Package: scsi-modules-2.6.14-2-parisc-di Status: install ok unpacked Version: 1.4 Provides: scsi-modules Depends: kernel-image-2.6.14-2-parisc-di, cdrom-core-modules-2.6.14-2-parisc-di Description: SCSI drivers Package: debian-installer Status: install ok installed Version: cdrom-2.6-20060108 Description: debian installation image Package: apt-cdrom-setup Status: install ok installed Priority: extra Section: debian-installer Installed-Size: 36 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1:0.4 Depends: cdrom-detect Provides: apt-mirror-setup Description: set up a CD in sources.list Package: apt-mirror-setup Status: install ok installed Priority: extra Section: debian-installer Installed-Size: 84 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1:0.4 Depends: choose-mirror Description: set up a mirror in sources.list Package: apt-setup-udeb Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 68 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1:0.4 Depends: apt-mirror-setup Description: Configure apt Installer-Menu-Item: 70 Package: base-installer Status: install ok installed Priority: required Section: debian-installer Installed-Size: 420 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.42 Depends: libc6 (>= 2.3.5-1), libdebconfclient0, libdebian-installer4 (>= 0.36), mounted-partitions, debootstrap-udeb (>= 0.3.1), created-fstab, archdetect, di-utils-mapdevfs, di-utils (>= 1.16), rootskel (>= 1.19) Provides: kernel-installer Description: Install the base system Installer-Menu-Item: 65 Package: cdebconf-udeb Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 272 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 0.95 Depends: libc6 (>= 2.3.5-1), libdebian-installer4 (>= 0.37), libtextwrap1 (>> 0.01-0) Provides: debconf-2.0 Description: Debian Configuration Management System (C-implementation) Debconf is a configuration management system for Debian packages. It is used by some packages to prompt you for information before they are installed. This is a reimplementation of the original debconf version in C. . cdebconf-udeb is a minimal cdebconf package used by the debian-installer Package: choose-mirror Status: install ok installed Priority: extra Section: debian-installer Installed-Size: 232 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.17 Depends: libc6 (>= 2.3.5-1), libdebconfclient0, libdebian-installer4 (>= 0.36), configured-network Description: Choose mirror to install from Installer-Menu-Item: 23 Package: clock-setup Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 52 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 0.5 Depends: os-prober, tzsetup-udeb, mounted-partitions Description: set up clock Installer-Menu-Item: 62 Package: debootstrap-udeb Status: install ok installed Priority: required Section: debian-installer Installed-Size: 160 Maintainer: Anthony Towns <[EMAIL PROTECTED]> Version: 0.3.3 Depends: libc6 (>= 2.3.5-1), mounted-partitions Description: Bootstrap the Debian system debootstrap is used to create a Debian base system from scratch, without requiring the availability of dpkg or apt. It does this by downloading .deb files from a mirror site, and carefully unpacking them into a directory which can eventually be chrooted into. . debootstrap-udeb is a minimal package used by debian-installer. Package: dhcp-client-udeb Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 168 Maintainer: Eloy A. Paris <[EMAIL PROTECTED]> Version: 2.0pl5-19.4 Depends: libc6 (>= 2.3.5-1) Description: DHCP Client for debian-installer dhcp-client-udeb is a minimal dhcp package used by the debian-installer. Package: di-utils-mapdevfs Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 20 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.22 Depends: libc6 (>= 2.3.5-1), libdebian-installer4 (>= 0.36) Description: mapdevfs utility for the debian installer Package: disk-detect Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 52 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.32 Depends: cdebconf-udeb (>= 0.38), hw-detect, di-utils (>= 1.13) Provides: harddrive-detection Description: Detect disk drives Installer-Menu-Item: 35 Package: e2fsprogs-udeb Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 432 Maintainer: Theodore Y. Ts'o <[EMAIL PROTECTED]> Version: 1.38+1.39-WIP-2005.12.31-1 Depends: libblkid1-udeb, libc6 (>= 2.3.5-1) Description: stripped-down versions of e2fsprogs, for debian-installer This package is an e2fsprogs package built for a reduced size, so that it can help to save space in debian-installer. . Don't attempt to install this package, it has no support for a couple of features you surely want. Anyway it should refuse to install. Package: ethdetect Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 84 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.32 Depends: cdebconf-udeb (>= 0.38), hw-detect, di-utils (>= 1.13) Provides: ethernet-card-detection Description: Detect network hardware and load kernel drivers for it Installer-Menu-Item: 15 Package: ext3-modules-2.6.14-2-parisc-di Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 392 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.4 Depends: kernel-image-2.6.14-2-parisc-di Provides: ext3-modules Description: EXT3 filesystem support This package contains the EXT3 filesystem module for the Linux kernel. Package: jfsutils-udeb Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 1152 Maintainer: Stefan Hornburg (Racke) <[EMAIL PROTECTED]> Version: 1.1.8-1 Description: A stripped-down version of jfsutils, for debian-installer This package is a jfsutils package built for reduced size, so that it can help to save space in debian-installer. . Don't attempt to install this package, it has no support for a couple of features you surely want. Anyway, it should fail to install. Package: libblkid1-udeb Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 48 Maintainer: Theodore Y. Ts'o <[EMAIL PROTECTED]> Version: 1.38+1.39-WIP-2005.12.31-1 Depends: libc6 (>= 2.3.5-1) Provides: libblkid1 Description: block device id library The blkid library which allows system programs like fsck and mount to quickly and easily find block devices by filesystem UUID and LABEL. This allows system administrators to avoid specifiying filesystems by hard-coded device names, but via a logical naming system instead. . This is a minimal package for debian-installer. Package: libc6-udeb Status: install ok installed Priority: extra Section: debian-installer Installed-Size: 2160 Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org> Version: 2.3.5-12 Provides: libc6, libc-udeb, glibc-2.3.5-3 Description: GNU C Library: Shared libraries - udeb Contains the standard libraries that are used by nearly all programs on the system. This package includes shared versions of the standard C library and the standard math library, as well as many others. . This package contains a minimal set of libraries needed for the Debian installer. Do not install it on a normal system. Package: libdevmapper1.02-udeb Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 84 Maintainer: Debian LVM Team <[EMAIL PROTECTED]> Version: 2:1.02.02-1 Depends: libc6 (>= 2.3.5-1) Provides: libdevmapper1.02 Description: The Linux Kernel Device Mapper userspace library This is a udeb, or a microdeb, for the debian-installer. . The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management) Team's implementation of a minimalistic kernel-space driver that handles volume management, while keeping knowledge of the underlying device layout in user-space. This makes it useful for not only LVM, but EVMS, software raid, and other drivers that create "virtual" block devices. Package: libiw28-udeb Status: install ok installed Priority: extra Section: debian-installer Installed-Size: 40 Maintainer: Guus Sliepen <[EMAIL PROTECTED]> Version: 27+28pre13-1 Provides: libiw28 Description: Tools for manipulating Linux Wireless Extensions This package contains the Wireless tools, used to manipulate the Linux Wireless Extensions. The Wireless Extension is an interface allowing you to set Wireless LAN specific parameters and get the specific stats. . This is a udeb of the wireless tools. Package: libparted1.6-udeb Status: install ok installed Priority: extra Section: debian-installer Installed-Size: 432 Maintainer: Parted Maintainer Team <[EMAIL PROTECTED]> Version: 1.6.25.1-1 Depends: libc6 (>= 2.3.5-1), libuuid1 Provides: libparted1.6-13 Description: The GNU Parted disk partitioning shared library GNU Parted is a program that allows you to create, destroy, resize, move and copy hard disk partitions. This is useful for creating space for new operating systems, reorganising disk usage, and copying data to new hard disks. This package contains the Parted binary and manual page. . This package contains libparted, the required shared library used by Parted. This is a cut-down package with no normal documentation intended to be used in debian-installer. . Parted currently supports DOS, Mac, Sun, BSD, GPT, MIPS and PC98 disklabels/partition tables, as well as a 'loop' (raw disk) type which allows use on RAID/LVM. Filesystems which are currently fully supported are ext2, ext3, fat (FAT16 and FAT32), ReiserFS (with libreiserfs) and linux-swap. Parted can also detect and remove HFS (Mac OS), JFS, NTFS, UFS (Sun and HP), XFS and ASFS/AFFS/APFS (Amiga) filesystems, but cannot create, resize or check these filesystems yet. . Note that ReiserFS support is only enabled if you install the libreiserfs0.3-0 package. Since libreiserfs0.3-0 has been removed from sarge, ReiserFS support is not compiled in the default package. . The nature of this software means that any bugs could cause massive data loss. While there are no known bugs at the moment, they could exist, so please back up all important files before running it, and do so at your own risk. Package: libuuid1-udeb Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 28 Maintainer: Theodore Y. Ts'o <[EMAIL PROTECTED]> Version: 1.38+1.39-WIP-2005.12.31-1 Depends: libc6 (>= 2.3.5-1) Provides: libuuid1 Description: universally unique id library libuuid generates and parses 128-bit universally unique id's (UUID's), using a standard which is blessed by both Microsoft and DCE, and is being proposed as an internet standard. See the internet-draft: . draft-leach-uuids-guids-01.txt . for more information. . This is a minimal package for debian-installer. Package: loop-modules-2.6.14-2-parisc-di Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 60 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.4 Depends: kernel-image-2.6.14-2-parisc-di Provides: loop-modules Description: Loopback filesystem support This package contains loopback filesystem support for the Linux kernel. Package: lvm2-udeb Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 524 Maintainer: Debian LVM Team <[EMAIL PROTECTED]> Version: 2.02.01-3 Depends: libc6 (>= 2.3.5-1), libdevmapper1.02 Description: The Linux Logical Volume Manager This is a udeb, or a microdeb, for the debian-installer. . This is LVM2, the rewrite of The Linux Logical Volume Manager. LVM supports enterprise level volume management of disk and disk subsystems by grouping arbitrary disks into volume groups. The total capacity of volume groups can be allocated to logical volumes, which are accessed as regular block devices. Package: lvmcfg-utils Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 396 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.08 Depends: cdebconf-udeb, md-modules, lvm2-udeb, parted-udeb, di-utils (>= 1.15) Description: lvmcfg without the main menu item Package: md-modules-2.6.14-2-parisc-di Status: install ok installed Priority: extra Section: debian-installer Installed-Size: 488 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.4 Depends: kernel-image-2.6.14-2-parisc-di Provides: md-modules Description: RAID and LVM support This package contains RAID and LVM modules for the Linux kernel. Package: mdadm-udeb Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 116 Maintainer: Debian/Ubuntu mdadm maintainers <[EMAIL PROTECTED]> Version: 1.12.0-1 Depends: libc6 (>= 2.3.5-1) Description: tool to administer Linux md device arrays (software RAID) mdadm is a program that can be used to create, manage, and monitor MD devices. . mdadm-udeb is a minimal package used by the debian-installer. Package: mdcfg-utils Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 304 Maintainer: Paul Fleischer <[EMAIL PROTECTED]> Version: 1.13 Depends: cdebconf-udeb, md-modules, mdadm-udeb, partconf-find-partitions Description: Configure MD devices Use this module to configure the MD devices. Package: mkreiserfs-udeb Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 220 Maintainer: Ed Boraas <[EMAIL PROTECTED]> Version: 1:3.6.19-1 Depends: libc6 (>= 2.3.2.ds1-4), libuuid1 Description: User-level tools for ReiserFS filesystems This installer module contains the utility to create ReiserFS filesystems. . Homepage: http://www.namesys.com/ Package: netcfg Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 668 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.23 Depends: libc6 (>= 2.3.5-1), libdebconfclient0, libdebian-installer4 (>= 0.37), libiw28-udeb, cdebconf-udeb, dhcp-client-udeb | dhcp3-client-udeb | pump-udeb, ethernet-card-detection Provides: configured-network Description: Configure the network To install additional installer components or the Debian Base System over the network, you need to configure the network in the installer. This component will first try to configure your network with DHCP and ask you for static network configuration if this fails. The configured network settings will be copied to your newly installed system. Installer-Menu-Item: 18 Package: network-preseed Status: install ok unpacked Priority: standard Section: debian-installer Installed-Size: 20 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.11 Depends: configured-network, preseed-common Description: download debconf preseed file Installer-Menu-Item: 21 Package: nobootloader Status: install ok unpacked Priority: standard Section: debian-installer Installed-Size: 60 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.06 Depends: cdebconf-udeb, base-installer (>= 1.23), di-utils-mapdevfs Provides: bootable-system Description: Don't install any bootloader. This package will skip installing a boot-loader Installer-Menu-Item: 77 Package: os-prober-udeb Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 96 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.09 Depends: di-utils-mapdevfs, anna (>= 1.16) Provides: os-prober Description: utility to detect other OSes on a set of drives This package is to be used by boot loader installers to detect other OSes available on a system, in a generic format, which it can then adapt to its own configuration format. Package: palo-installer Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 12 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 0.0.8 Depends: cdebconf-udeb, base-installer, di-utils-mapdevfs Provides: bootable-system Description: Install PALO on a hard disk Installer-Menu-Item: 73 Package: partconf-find-partitions Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 36 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.11 Depends: libc6 (>= 2.3.5-1), libdebian-installer4 (>= 0.35), libparted1.6-13 (>= 1.6.0), libparted1.6-udeb Description: debian-installer utility for finding partitions Helper program for finding partitions and detecting their size and existing file system. Package: parted-udeb Status: install ok installed Priority: extra Section: debian-installer Installed-Size: 68 Maintainer: Parted Maintainer Team <[EMAIL PROTECTED]> Version: 1.6.25.1-1 Depends: libc6 (>= 2.3.5-1), libparted1.6-13 (>= 1.6.24) Provides: parted Description: The GNU Parted disk partition resizing program GNU Parted is a program that allows you to create, destroy, resize, move and copy hard disk partitions. This is useful for creating space for new operating systems, reorganising disk usage, and copying data to new hard disks. This package contains the Parted binary and manual page. . This package is similar to the "big" parted package, but has less cosmetical features resulting in smaller binary. Intended to be used in debian-installer. . . The nature of this software means that any bugs could cause massive data loss. While there are no known bugs at the moment, they could exist, so please back up all important files before running it, and do so at your own risk. Package: partman-auto Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 260 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 46 Depends: partman-base, partman-basicfilesystems, partman-ext3 Description: Automatically partition storage devices (partman) Package: partman-auto-lvm Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 56 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 7 Depends: partman-base (>= 73), partman-auto (>= 46), partman-lvm, di-utils (>= 1.15), lvm2-udeb Description: Automatically partition storage devices using LVM Package: partman-base Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 772 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 78 Depends: libc6 (>= 2.3.5-1), libparted1.6-13 (>= 1.6.24), libparted1.6-udeb, partman-partitioning, partman-target, archdetect, harddrive-detection, di-utils-mapdevfs, di-utils (>= 1.15) Provides: partman, made-filesystems, mounted-partitions, partitioned-harddrives, created-fstab Description: Partition the storage devices (partman) Installer-Menu-Item: 42 Package: partman-basicfilesystems Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 480 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 45 Depends: e2fsprogs-udeb, ext2-modules, fat-modules, di-utils (>= 1.14) Provides: partman-filesystem Description: Add to partman support for ext2, linux-swap, fat16 and fat32 Package: partman-basicmethods Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 116 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 29 Provides: partman-method Description: Basic partition usage methods for partman This package provides partman with two methods to use partitions. The first is to format the partition. The second is to keep and use the existing data in the partition as it is. Package: partman-ext3 Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 188 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 39 Depends: e2fsprogs-udeb, ext3-modules, partman-basicfilesystems, di-utils (>= 1.14) Provides: partman-filesystem Description: Add to partman support for ext3 Package: partman-jfs Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 216 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 15 Depends: jfsutils-udeb, jfs-modules, partman-basicfilesystems, di-utils (>= 1.14) Provides: partman-filesystem Description: Add support for jfs to partman Package: partman-lvm Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 148 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 32 Depends: lvmcfg-utils, lvm2-udeb, partman-base, di-utils (>= 1.14) Description: Add to partman support for LVM Package: partman-md Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 136 Maintainer: Paul Fleischer <[EMAIL PROTECTED]> Version: 22 Depends: mdadm-udeb, mdcfg-utils, partman-base Description: Add to partman support for MD Package: partman-palo Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 84 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 3 Depends: palo-udeb, partman Description: Add to partman support for PALO boot partitions Package: partman-partitioning Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 316 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 37 Description: Partitioning operations for partman This udeb provides partman with editing operations for creation of new partitions, deletion of partitions and initialisation of the partition table. Package: partman-reiserfs Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 192 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 28 Depends: reiserfsprogs-udeb, reiserfs-modules, partman-basicfilesystems, di-utils (>= 1.14) Provides: partman-filesystem Description: Add to partman support for reiserfs Package: partman-target Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 232 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 41 Depends: partman-basicfilesystems, partman-basicmethods, di-utils-mapdevfs Description: Provides partman with ability to prepare /target This udeb allows the user to choose how partitions should be used. Package: partman-xfs Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 192 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 27 Depends: xfsprogs-udeb, xfs-modules, partman-basicfilesystems, di-utils (>= 1.14) Provides: partman-filesystem Description: Add to partman support for xfs Package: pkgsel Status: install ok half-configured Priority: standard Section: debian-installer Installed-Size: 20 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 0.04 Depends: apt-setup-udeb, di-utils (>= 1.20) Description: Select and install packages Installer-Menu-Item: 70 Package: prebaseconfig Status: install ok unpacked Priority: required Section: debian-installer Installed-Size: 104 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.14 Depends: archdetect, base-installer, created-fstab, bootable-system Description: Finish the installation and reboot finish the installation and reboot Installer-Menu-Item: 78 Package: tzsetup-udeb Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 196 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1:0.7 Depends: localechooser Description: choose timezone Installer-Menu-Item: 62 Package: user-setup-udeb Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 188 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 0.05 Depends: cdebconf-udeb Description: Set up users and passwords Installer-Menu-Item: 63 Package: xfs-modules-2.6.14-2-parisc-di Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 884 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.4 Depends: kernel-image-2.6.14-2-parisc-di Provides: xfs-modules Description: XFS filesystem support This package contains the XFS filesystem module for the Linux kernel. Package: xfsprogs-udeb Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 276 Maintainer: Nathan Scott <[EMAIL PROTECTED]> Version: 2.7.7-1 Depends: libc6 (>= 2.3.5-1), libuuid1 Description: A stripped-down version of xfsprogs, for debian-installer This package is an xfsprogs package built for reduced size, so that it can help to save space in debian-installer. . Don't attempt to install this package, it has no support for a couple of features you surely want. Anyway, it should fail to install. ============================================== Installer syslog: ============================================== ============================================== Installer messages log: ============================================== ============================================== Installer partman log: ============================================== -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]