cr said: >> I've concluded that there must be something fairly basic wrong with my bios settings or maybe the MBR (though I did run bios autodetect before I started all this and made sure the alternatives I selected gave the same drive/head/sector numbers as the labels on the hard drives did). I'm not sure what tools there are for investigating MBR settings or drive geometry. Meanwhile, boot floppies work (though the Debian one is awfully slow ;) cr ============quote from original post
[The details - I installed GRUB in accordance with /usr/share/doc/grub/README.Debian - 1. grub-install --root-directory=boot /dev/hda 2. Ran update-grub and titleDebian GNU/Linux, kernel 2.2.20-idepci root(hd0,0) kernel /vmlinuz-2.2.20-idepci root=/dev/hda1 ro savedefault ==================================== cr, it looks like /boot is available from both /etc/fstab and from your df listing. I am assuming that you ran 'update-grub' first to produce menu.lst, but even if you hadn't done that, by now you have rerun grub-install enough. I notice that 1. has --root-directory=boot. That should be --root-directory=/boot according to the README.Debian file. The other thing to check is in your menu.lst It says: kernel /vmlinuz-2.2.20-idepci root=/dev/hda1 ro Is that where that kernel is or is it /boot/vmlinuz-2... ? I think that /vmlinuz is a symlink to /boot/vmlinuz-2...; so /vmlinuz might work, but I don't think what you have will work unless that is actually what is in / . Unfortunately my /boot is on my root partition here where I just tried this myself. If you think that your MBR settings, whatever those are, might be messed up, you could try installing grub on a floppy. I just did that on my system. First I ran update-grub after installing grub on the system. I edited /boot/grub/menu.lst which had root(hd0,0) to make it (hd0,2) since it is on /dev/hda3. The rest of it seemed fine. Then I ran 'grub-install /dev/fd0' with a floppy in the drive. So you would do 'grub-install --root-directory=/boot /dev/fd0' I think. Anita -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]