Hi, Just reinstalled debian and are having lots of problems getting the sound to work through HDMI. I had it working but now it has just stopped. I'm watching the screen through the same HDMI so I presume hardware is good.
Eventually I want to use this system to run MPD. Here's my setup as described by aplay; james@Hawaiian:~$ aplay -L null Discard all samples (playback) or generate zero samples (capture) pulse PulseAudio Sound Server default:CARD=Intel HDA Intel, ALC889A Analog Default Audio Device sysdefault:CARD=Intel HDA Intel, ALC889A Analog Default Audio Device front:CARD=Intel,DEV=0 HDA Intel, ALC889A Analog Front speakers surround40:CARD=Intel,DEV=0 HDA Intel, ALC889A Analog 4.0 Surround output to Front and Rear speakers surround41:CARD=Intel,DEV=0 HDA Intel, ALC889A Analog 4.1 Surround output to Front, Rear and Subwoofer speakers surround50:CARD=Intel,DEV=0 HDA Intel, ALC889A Analog 5.0 Surround output to Front, Center and Rear speakers surround51:CARD=Intel,DEV=0 HDA Intel, ALC889A Analog 5.1 Surround output to Front, Center, Rear and Subwoofer speakers surround71:CARD=Intel,DEV=0 HDA Intel, ALC889A Analog 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers iec958:CARD=Intel,DEV=0 HDA Intel, ALC889A Digital IEC958 (S/PDIF) Digital Audio Output james@Hawaiian:~$ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: Intel [HDA Intel], device 0: ALC889A Analog [ALC889A Analog] Subdevices: 0/1 Subdevice #0: subdevice #0 card 0: Intel [HDA Intel], device 1: ALC889A Digital [ALC889A Digital] Subdevices: 0/1 Subdevice #0: subdevice #0 In my pulseaudio setup I added the first line here, and commented out the second. load-module module-alsa-sink device=hw:0,1 #load-module module-alsa-source device=hw:1,0 KDE is now giving me an error about internal devices removed; both output and capture on the pulse sound server. I'm not sure where I'm now going with this, so if anyone could help me debug this, I would greatly appreciate it. Thanks, James