A I had done the first part throught gparted there were only two commands left for running:
lvextend -L +1G /dev/mapper/j0003--vg-root resize2fs /dev/mapper/j0003--vg-root Thank you. 2016-11-19 14:15 GMT+01:00 Dan Ritter <d...@randomstring.org>: > On Sat, Nov 19, 2016 at 11:28:57AM +0100, Jorge Expósito wrote: > > I've extended the virtual drive on VMware from 7 Gb to 8 Gb. > > Rebooted my guest Debian with Gparted and extended the drive with the 1 > > extra Gb successfuly. > > Rebooting again and starting my virtualized Debian I make a fdisk -l and > > it seems that the extra Gb is actually there. > > > > Device Boot Start End Sectors Size Id Type > > /dev/sda1 * 2048 499711 497664 243M 83 Linux > > /dev/sda2 501758 16777215 16275458 7,8G 5 Extended > > /dev/sda5 501760 16777215 16275456 7,8G 8e Linux LVM > > These are the underlying partitions... > > > But if I run df -h it seems that it is not. > > > > S.ficheros Tamaño Usados Disp Uso% Montado en > > /dev/dm-0 6,3G 4,8G 1,1G 82% / > > udev 10M 0 10M 0% /dev > > tmpfs 202M 5,6M 196M 3% /run > > tmpfs 504M 4,0K 504M 1% /dev/shm > > tmpfs 5,0M 0 5,0M 0% /run/lock > > tmpfs 504M 0 504M 0% /sys/fs/cgroup > > /dev/sda1 236M 32M 192M 15% /boot > > and these are the filesystems built inside those partitions. > > > What's the problem? > > The next step is to resize the filesystem to fill the partition. > > Each filesystem type has a specific tool to do that; for > ext2/3/4, the tool is resize2fs. Some filesystem types are not > resizable. > > Use `mount` to figure out what filesystem types are in use. > > -dsr- > -- -- Jorge --
