Remember what I told you about main/icu: it doesn't build deterministically, sometimes it fails and sometimes it passes for no apparent reason, keep cleaning and rebuilding in its directory until it builds then "deliver" and continue as before.
On Thu, Feb 4, 2016 at 4:21 PM, Patricia Shanahan <p...@acm.org> wrote: > I had 25 consecutive "build --all" attempts fail, at different places, due > to the retryable errors. The general behavior, and the fact that the > frequency of failure varies from environment to environment, supports the > theory that the failures are due to poorly managed multiprocessing. > > Accordingly, yesterday I started a completely clean build, from a fresh > checkout, with enable_multiprocessing set to zero in both build.pl and > build_client.pl. Is there anything else I need to do to suppress MP? > > That built attempt failed with the following error: > > NMAKE : fatal error U1073: don't know how to make '".\..\..\lib\icuin.lib"' > Stop. > NMAKE : fatal error U1077: 'C:\PROGRA~2\MICROS~1.0\VC\bin\nmake.exe' : > return code '0x2' > Stop. > dmake: Error code 2, while making './ > wntmsci12.pro/misc/build/so_built_so_icu' > ERROR: error 65280 occurred while making > /cygdrive/c/OpenOfficeDev/Trunk/main/icu > > > > On 2/4/2016 3:16 AM, Regina Henschel wrote: > >> Hi Patricia, >> >> I had sometimes curious build breaks because of parallelism and virus >> scan. So please try to make a build without any parallelism and disable >> virus scan. Additional benefit: without parallelism, the log tells you >> the actual module order. >> >> Kind regards >> Regina >> >> Patricia Shanahan schrieb: >> >>> Yes, there is certainly stuff to investigate. My latest failure is: >>> >>> /usr/bin/cp: missing destination file operand after >>> '/cygdrive/c/OpenOfficeDev/Trunk/main/solver/420/ >>> wntmsci12.pro/lib/isvl.lib' >>> >>> >>> Try '/usr/bin/cp --help' for more information. >>> C:/OpenOfficeDev/Trunk/main/solenv/gbuild/StaticLibrary.mk:45: recipe >>> for target >>> '/cygdrive/c/OpenOfficeDev/Trunk/main/solver/420/ >>> wntmsci12.pro/lib/isvl.lib' >>> >>> failed >>> make: *** >>> [/cygdrive/c/OpenOfficeDev/Trunk/main/solver/420/ >>> wntmsci12.pro/lib/isvl.lib] >>> >>> Error 1 >>> dmake: Error code 2, while making 'all' >>> >>> 1 module(s): >>> xmloff >>> need(s) to be rebuilt >>> >>> Reason(s): >>> >>> ERROR: error 65280 occurred while making >>> /cygdrive/c/OpenOfficeDev/Trunk/main/xmloff/prj >>> >>> When you have fixed the errors in that module you can resume the build >>> by running: >>> >>> build --all:xmloff >>> >>> >>> On 2/3/2016 3:33 AM, Damjan Jovanovic wrote: >>> >>>> main/oox/prj/build.lst already lists xmlscript as a dependency, so >>>> "build" >>>> should have built it before starting to build oox. Something must be >>>> very >>>> wrong for it not to. >>>> >>>> On Wed, Feb 3, 2016 at 1:28 PM, Patricia Shanahan <p...@acm.org> wrote: >>>> >>>> Yes, thanks. At least, it gets past oox. >>>>> >>>>> So one trick for a missing file is to explicitly build and deliver in >>>>> the >>>>> directory the file should have come from. >>>>> >>>>> Later, I may do a new build from a clean check-out, and try to >>>>> investigate >>>>> anomalies. Right now, my objective is to just get it built. >>>>> >>>>> >>>>> On 2/3/2016 3:19 AM, Damjan Jovanovic wrote: >>>>> >>>>> That is strange. Does it work if you first do "build" and "deliver" in >>>>>> main/xmlscript? >>>>>> >>>>>> On Wed, Feb 3, 2016 at 1:07 PM, Patricia Shanahan <p...@acm.org> >>>>>> wrote: >>>>>> >>>>>> I am now getting to: >>>>>> >>>>>>> >>>>>>> Compiling: oox/source/ole/vbacontrol.cxx >>>>>>> C:/OpenOfficeDev/Trunk/main/oox/source/ole/vbacontrol.cxx(34) : fatal >>>>>>> error C1083: Cannot open include file: >>>>>>> 'xmlscript/xmldlg_imexp.hxx': No >>>>>>> such file or directory >>>>>>> dmake: Error code 2, while making '../../ >>>>>>> wntmsci12.pro/slo/vbacontrol.obj >>>>>>> ' >>>>>>> >>>>>>> 1 module(s): >>>>>>> oox >>>>>>> need(s) to be rebuilt >>>>>>> >>>>>>> Reason(s): >>>>>>> >>>>>>> ERROR: error 65280 occurred while making >>>>>>> /cygdrive/c/OpenOfficeDev/Trunk/main/oox/source/ole >>>>>>> >>>>>>> >>>>>>> >>>>>>> On 2/2/2016 9:33 PM, Patricia Shanahan wrote: >>>>>>> >>>>>>> python had apparently not been built. I don't know why. I was able to >>>>>>> >>>>>>>> get the build going again with "build --all:python". >>>>>>>> >>>>>>>> It is now making progress, but from time-to-time I get this sort of >>>>>>>> failure: >>>>>>>> >>>>>>>> >>>>>>>> ====================================================================== >>>>>>>> >>>>>>>> >>>>>>>> c:/OpenOfficeDev/Trunk/main/svl/source/numbers/zformat.cxx(25) : >>>>>>>> fatal >>>>>>>> error C1859: >>>>>>>> 'c:/OpenOfficeDev/Trunk/main/solver/420/ >>>>>>>> >>>>>>>> wntmsci12.pro/workdir/PrecompiledHeader/nodebug/precompiled_svl.hxx.pch >>>>>>>> >>>>>>>> >>>>>>>> ' >>>>>>>> unexpected precompiled header error, simply rerunning the compiler >>>>>>>> might >>>>>>>> fix this problem >>>>>>>> C:/OpenOfficeDev/Trunk/main/solenv/gbuild/LinkTarget.mk:126: >>>>>>>> recipe for >>>>>>>> target >>>>>>>> '/cygdrive/c/OpenOfficeDev/Trunk/main/solver/420/ >>>>>>>> wntmsci12.pro/workdir/CxxObject/svl/source/numbers/zformat.o' >>>>>>>> failed >>>>>>>> make: *** >>>>>>>> [/cygdrive/c/OpenOfficeDev/Trunk/main/solver/420/ >>>>>>>> wntmsci12.pro/workdir/CxxObject/svl/source/numbers/zformat.o] >>>>>>>> Error 2 >>>>>>>> dmake: Error code 2, while making 'all' >>>>>>>> >>>>>>>> 1 module(s): >>>>>>>> svl >>>>>>>> need(s) to be rebuilt >>>>>>>> >>>>>>>> Reason(s): >>>>>>>> >>>>>>>> ERROR: error 65280 occurred while making >>>>>>>> /cygdrive/c/OpenOfficeDev/Trunk/main/svl/prj >>>>>>>> >>>>>>>> When you have fixed the errors in that module you can resume the >>>>>>>> build >>>>>>>> by running: >>>>>>>> >>>>>>>> build --all:svl >>>>>>>> >>>>>>>> ====================================================================== >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> The build system knows the failure is potentially retriable. It >>>>>>>> tells me >>>>>>>> exactly what to type to do the retry. WHY can't it just retry >>>>>>>> itself, >>>>>>>> without needing my fingers on the keyboard? >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> On 2/2/2016 8:10 AM, Patricia Shanahan wrote: >>>>>>>> >>>>>>>> OpenGrok looks and sounds like something I should learn about. >>>>>>>> >>>>>>>>> >>>>>>>>> I think my next step is to look into the state of python. Matters >>>>>>>>> may >>>>>>>>> have been complicated because I did a "dmake clean" after >>>>>>>>> changing my >>>>>>>>> configure parameters to use a 32 bit JDK, before continuing the >>>>>>>>> steps >>>>>>>>> from configure on. >>>>>>>>> >>>>>>>>> There may be a pause - I have some non-programming stuff to do >>>>>>>>> today >>>>>>>>> and >>>>>>>>> tomorrow morning. >>>>>>>>> >>>>>>>>> Thanks for all the help. Posting immediately on hitting a >>>>>>>>> problem is >>>>>>>>> definitely getting faster progress than when I tried to puzzle >>>>>>>>> things >>>>>>>>> out for myself first. >>>>>>>>> >>>>>>>>> On 2/2/2016 6:39 AM, Damjan Jovanovic wrote: >>>>>>>>> >>>>>>>>> OpenGrok[1] tells me the pyversion.mk file is in main/python; >>>>>>>>> through >>>>>>>>> >>>>>>>>>> building it would get delivered to main/solver/... and found by >>>>>>>>>> pyuno. >>>>>>>>>> Did >>>>>>>>>> python not build before pyuno did? pyuno/prj/build.lst lists a >>>>>>>>>> dependency >>>>>>>>>> on python when PYTHON is defined[2]: >>>>>>>>>> >>>>>>>>>> bgpu pyuno : stoc cpputools cppuhelper bridges tools >>>>>>>>>> PYTHON:python >>>>>>>>>> LIBXSLT:libxslt NULL >>>>>>>>>> >>>>>>>>>> but earlier you posted your config.log which had this in it: >>>>>>>>>> >>>>>>>>>> PYTHON='' >>>>>>>>>> >>>>>>>>>> and I am not sure whether that's enough. If the problem is that >>>>>>>>>> the >>>>>>>>>> python >>>>>>>>>> module isn't getting built first, you can force it to build first >>>>>>>>>> through >>>>>>>>>> one of these hacks: >>>>>>>>>> * delete the "PYTHON:" prefix to "python" from the build.lst line >>>>>>>>>> * manually building python before resuming the build: >>>>>>>>>> cd main/python >>>>>>>>>> build >>>>>>>>>> deliver >>>>>>>>>> cd ../instsetoo_native >>>>>>>>>> build --all -P2 -- -P2 >>>>>>>>>> >>>>>>>>>> References: >>>>>>>>>> [1] >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> http://opengrok.adfinis-sygroup.org/source/search?q=&defs=&refs=&path=pyversion.mk&hist=&project=aoo-trunk >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> [2] >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> http://opengrok.adfinis-sygroup.org/source/xref/aoo-trunk/main/pyuno/prj/build.lst >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> On Tue, Feb 2, 2016 at 4:21 PM, Patricia Shanahan <p...@acm.org> >>>>>>>>>> wrote: >>>>>>>>>> >>>>>>>>>> Thanks. Now I get to: >>>>>>>>>> >>>>>>>>>> >>>>>>>>>>> ============= >>>>>>>>>>> Building module pyuno >>>>>>>>>>> ============= >>>>>>>>>>> >>>>>>>>>>> Entering /cygdrive/c/OpenOfficeDev/Trunk/main/pyuno/source/module >>>>>>>>>>> >>>>>>>>>>> mkout -- version: 1.8 >>>>>>>>>>> dmake: makefile.mk: line 56: Error: -- Include file >>>>>>>>>>> pyversion.mk, >>>>>>>>>>> not >>>>>>>>>>> found >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> On 2/2/2016 4:18 AM, Damjan Jovanovic wrote: >>>>>>>>>>> >>>>>>>>>>> For me, main/icu fails to build on Windows about 50% of the time >>>>>>>>>>> >>>>>>>>>>> for no >>>>>>>>>>>> apparent reason; I've begun to think it's some sort of build >>>>>>>>>>>> race >>>>>>>>>>>> condition >>>>>>>>>>>> within that module. I haven't seen the buildbots fail there, and >>>>>>>>>>>> nobody >>>>>>>>>>>> else has reported this problem. >>>>>>>>>>>> >>>>>>>>>>>> If this is your problem, the only fix I know is the following >>>>>>>>>>>> hack: >>>>>>>>>>>> >>>>>>>>>>>> cd main/icu >>>>>>>>>>>> >>>>>>>>>>>> then keep cleaning and rebuilding it until it builds >>>>>>>>>>>> successfully: >>>>>>>>>>>> >>>>>>>>>>>> rm -rf wntmsci12.pro >>>>>>>>>>>> one of: dmake / build -P2 / build -- -P2 / build -P2 -- -P2 >>>>>>>>>>>> >>>>>>>>>>>> then when it does, continue as before: >>>>>>>>>>>> >>>>>>>>>>>> cd ../instsetoo_native >>>>>>>>>>>> build --all -P2 -- -P2 >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> On Tue, Feb 2, 2016 at 2:00 PM, Patricia Shanahan <p...@acm.org >>>>>>>>>>>> > >>>>>>>>>>>> wrote: >>>>>>>>>>>> >>>>>>>>>>>> Good. My latest error is: >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> NMAKE : fatal error U1073: don't know how to make >>>>>>>>>>>>> '".\..\..\lib\icuin.lib"' >>>>>>>>>>>>> Stop. >>>>>>>>>>>>> NMAKE : fatal error U1077: >>>>>>>>>>>>> 'C:\PROGRA~2\MICROS~1.0\VC\bin\nmake.exe' : >>>>>>>>>>>>> return code '0x2' >>>>>>>>>>>>> Stop. >>>>>>>>>>>>> dmake: Error code 2, while making './ >>>>>>>>>>>>> wntmsci12.pro/misc/build/so_built_so_icu' >>>>>>>>>>>>> >>>>>>>>>>>>> I am hoping after this is all done to add a section on >>>>>>>>>>>>> gotchas and >>>>>>>>>>>>> their >>>>>>>>>>>>> symptoms to the step-by-step guide. That may save future new >>>>>>>>>>>>> developers >>>>>>>>>>>>> some time. >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> On 2/2/2016 3:32 AM, Damjan Jovanovic wrote: >>>>>>>>>>>>> >>>>>>>>>>>>> I've documented this gotcha on both >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> https://wiki.openoffice.org/wiki/Documentation/Building_Guide_AOO/Step_by_step >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> and >>>>>>>>>>>>>> >>>>>>>>>>>>>> https://wiki.openoffice.org/wiki/Documentation/Building_Guide_AOO >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> On Tue, Feb 2, 2016 at 10:29 AM, Patricia Shanahan >>>>>>>>>>>>>> <p...@acm.org> >>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>> >>>>>>>>>>>>>> Thanks. >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> On 2/1/2016 11:50 PM, Damjan Jovanovic wrote: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> According to >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> http://stackoverflow.com/questions/19641685/java-jni-jawt-error-unresolved-external-symbol-imp-jawt-getawt8 >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> you're using a 64 bit JDK instead of a 32 bit one. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> On Tue, Feb 2, 2016 at 9:40 AM, Patricia Shanahan >>>>>>>>>>>>>>>> <p...@acm.org >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> After checking out with Cygwin's svn rather than >>>>>>>>>>>>>>>> TortoiseSVN, my >>>>>>>>>>>>>>>> build >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> failed in "Building module bean" with the following message: >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Creating library >>>>>>>>>>>>>>>>> ../../wntmsci12.pro/lib/iofficebean_t1.lib >>>>>>>>>>>>>>>>> and >>>>>>>>>>>>>>>>> object >>>>>>>>>>>>>>>>> ../../wntmsci12.pro/lib/iofficebean_t1.exp >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> officebean.lib(com_sun_star_comp_beans_LocalOfficeWindow.obj) >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> : >>>>>>>>>>>>>>>>> error >>>>>>>>>>>>>>>>> LNK2019: unresolved external symbol __imp__JAWT_GetAWT@8 >>>>>>>>>>>>>>>>> referenced >>>>>>>>>>>>>>>>> in >>>>>>>>>>>>>>>>> function >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> _Java_com_sun_star_comp_beans_LocalOfficeWindow_getNativeWindow@8 >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> ../../wntmsci12.pro/bin/officebean.dll : fatal error >>>>>>>>>>>>>>>>> LNK1120: >>>>>>>>>>>>>>>>> 1 >>>>>>>>>>>>>>>>> unresolved externals >>>>>>>>>>>>>>>>> dmake: Error code 96, while making '../../ >>>>>>>>>>>>>>>>> wntmsci12.pro/bin/officebean.dll' >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> --------------------------------------------------------------------- >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> To unsubscribe, e-mail: >>>>>>>>>>>>>>>>> dev-unsubscr...@openoffice.apache.org >>>>>>>>>>>>>>>>> For additional commands, e-mail: >>>>>>>>>>>>>>>>> dev-h...@openoffice.apache.org >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> --------------------------------------------------------------------- >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> To unsubscribe, e-mail: >>>>>>>>>>>>>>>>> dev-unsubscr...@openoffice.apache.org >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> For additional commands, e-mail: >>>>>>>>>>>>>>> dev-h...@openoffice.apache.org >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>> --------------------------------------------------------------------- >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> To unsubscribe, e-mail: dev-unsubscr...@openoffice.apache.org >>>>>>>>>>>>>> >>>>>>>>>>>>>> For additional commands, e-mail: >>>>>>>>>>>>> dev-h...@openoffice.apache.org >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>> --------------------------------------------------------------------- >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> To unsubscribe, e-mail: dev-unsubscr...@openoffice.apache.org >>>>>>>>>>> For additional commands, e-mail: dev-h...@openoffice.apache.org >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>> --------------------------------------------------------------------- >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> To unsubscribe, e-mail: dev-unsubscr...@openoffice.apache.org >>>>>>>>> For additional commands, e-mail: dev-h...@openoffice.apache.org >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> --------------------------------------------------------------------- >>>>>>>>> >>>>>>>>> >>>>>>>>> To unsubscribe, e-mail: dev-unsubscr...@openoffice.apache.org >>>>>>> For additional commands, e-mail: dev-h...@openoffice.apache.org >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>> --------------------------------------------------------------------- >>>>> To unsubscribe, e-mail: dev-unsubscr...@openoffice.apache.org >>>>> For additional commands, e-mail: dev-h...@openoffice.apache.org >>>>> >>>>> >>>>> >>>> >>> --------------------------------------------------------------------- >>> To unsubscribe, e-mail: dev-unsubscr...@openoffice.apache.org >>> For additional commands, e-mail: dev-h...@openoffice.apache.org >>> >>> >>> >> >> --------------------------------------------------------------------- >> To unsubscribe, e-mail: dev-unsubscr...@openoffice.apache.org >> For additional commands, e-mail: dev-h...@openoffice.apache.org >> >> > --------------------------------------------------------------------- > To unsubscribe, e-mail: dev-unsubscr...@openoffice.apache.org > For additional commands, e-mail: dev-h...@openoffice.apache.org > >
