On Fri, 2004-08-27 at 09:14 -0700, Tim Roberts wrote: > [EMAIL PROTECTED] wrote: > > >>(**) RADEON(0): *Mode "1400x1050": 108.0 MHz (scaled from 0.0 MHz), 64.6 kHz, 60.8 > >>Hz > >>(II) RADEON(0): Modeline "1400x1050" 108.00 1400 34208 34320 1672 1050 1050 > >>1053 1063 > >>(**) RADEON(0): *Mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.6 kHz, 60.8 > >>Hz > >>(II) RADEON(0): Modeline "1280x1024" 108.00 1280 34208 34320 1672 1024 1050 > >>1053 1063 > >>(**) RADEON(0): *Mode "640x480": 108.0 MHz (scaled from 0.0 MHz), 64.6 kHz, 60.8 Hz > >>(II) RADEON(0): Modeline "640x480" 108.00 640 34208 34320 1672 480 1050 1053 > >>1063 > >>(**) RADEON(0): *Mode "800x600": 108.0 MHz (scaled from 0.0 MHz), 64.6 kHz, 60.8 Hz > >>(II) RADEON(0): Modeline "800x600" 108.00 800 34208 34320 1672 600 1050 1053 > >>1063 > >>(**) RADEON(0): *Mode "1024x768": 108.0 MHz (scaled from 0.0 MHz), 64.6 kHz, 60.8 > >>Hz > >>(II) RADEON(0): Modeline "1024x768" 108.00 1024 34208 34320 1672 768 1050 1053 > >>1063 > > > > These aren't right. Every mode in the list (including the 7 default > modes I deleted) is shown as having a pixel clock of 108 MHz, horiz of > 64.6 kHz, and vert of 60.8 Hz. The sync and blank numbers in the > modeline are bonkers, too. > > Is this a general issue in the 4.4.99 release, or only for this gentleman?
This is business as usual with the radeon driver driving a digital connector and not a problem here. My question to the original poster would be whether he absolutely needs UseFBDev and if yes, what for? -- Earthling Michel DÃnzer | Debian (powerpc), X and DRI developer Libre software enthusiast | http://svcs.affero.net/rm.php?r=daenzer _______________________________________________ Devel mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/devel
