On Thu, 04 Apr 2024, Yoshinori Sato wrote:

> Various parameters of SM501 can be set using platform_data,
> so parameters cannot be passed in the DeviceTree target.
> Expands the parameters set in platform_data so that they can be
> specified using DeviceTree properties.
> 
> Signed-off-by: Yoshinori Sato <ys...@users.sourceforge.jp>
> ---
>  drivers/mfd/sm501.c           | 315 ++++++++++++++++++++++++++++++++++
>  drivers/video/fbdev/sm501fb.c | 106 ++++++++++++
>  2 files changed, 421 insertions(+)

I don't know exactly what this is, but I do know that I don't like it.

If you manage to get it through another maintainer, more power to you,
but it is not suitable for MFD.

> diff --git a/drivers/mfd/sm501.c b/drivers/mfd/sm501.c
> index b3592982a83b..98a69e254f5f 100644
> --- a/drivers/mfd/sm501.c
> +++ b/drivers/mfd/sm501.c
> @@ -82,6 +82,16 @@ struct sm501_devdata {
>       unsigned int                     rev;
>  };
>  
> +struct sm501_config_props_uint {
> +     char *name;
> +     u32 shift;
> +};
> +
> +struct sm501_config_props_flag {
> +     char *clr_name;
> +     char *set_name;
> +     u32 bit;
> +};
>  
>  #define MHZ (1000 * 1000)
>  
> @@ -1370,6 +1380,305 @@ static int sm501_init_dev(struct sm501_devdata *sm)
>       return 0;
>  }
>  
> +static const struct sm501_config_props_uint misc_timing[] = {
> +     {"delay",    0},
> +     {"-",        3},
> +     {"divider",  4},
> +     {"-",        6},
> +     {"sm0",      8},
> +     {"-",       12},
> +     {"sm1",     16},
> +     {"-",       20},
> +     {"xc",      24},
> +     {"-",       26},
> +     {"ex",      28},
> +     {NULL,      32},
> +};
> +
> +static const struct sm501_config_props_flag misc_timing_flag[] = {
> +     {"usb-host-normal",          "usb-host-simulation",    3},
> +     {"no-acpi-control",          "acpi-control",           6},
> +     {"pll-debug-input",          "pll-debug-output",       7},
> +     {"sdram-clock-mode0-288mhz", "sdram-clock-mode0-div", 12},
> +     {"sdram-clock-mode1-288mhz", "sdram-clock-mode1-div", 20},
> +     {"usb-over-current-detect-disable",
> +      "usb-over-current-detect-enable",  23},
> +     {},
> +};
> +
> +static const struct sm501_config_props_uint misc_control[] = {
> +     {"hold",     18},
> +     {"refresh",  21},
> +     {"-",        23},
> +     {"usbclk",   28},
> +     {"pad",      30},
> +     {NULL,       32},
> +};
> +
> +static const struct sm501_config_props_flag misc_control_flag[] = {
> +     {"vr-mmio-30mb",            "vr-mmio-62mb",             4},
> +     {"usb-port-master",         "usb-port-slave",           9},
> +     {"burst-length-8",          "burst-length-1",          10},
> +     {"usb-slave-cpu",           "usb-slave-8051",          11},
> +     {"dac-power-enable",        "dac-power-disable",       12},
> +     {"pll-clock-count-disable", "pll-clock-count-enable",  15},
> +     {"interrupt-normal",        "interrupt-invarted",      16},
> +     {"sh-ready-low",            "sh-ready-high",           17},
> +     {"xtal-freq-24mhz",         "xtal-freq-12mhz",         24},
> +     {"panel-data-18bit",        "panel-dtat-24bit",        25},
> +     {"latch-address-disable",   "latch-address-enable",    26},
> +     {"uart1",                   "ssp1",                    27},
> +     {},
> +};
> +
> +/* Read configuration values */
> +static void sm501_of_read_config(struct device *dev, struct device_node *np,
> +                              const char *prefix,
> +                              const struct sm501_config_props_uint *props,
> +                              const struct sm501_config_props_flag 
> *props_flag,
> +                              struct sm501_reg_init *ret)
> +{
> +     struct device_node *child;
> +     char *name;
> +     u32 shift;
> +     u32 width;
> +     u32 mask;
> +     u32 val;
> +
> +     ret->mask = ~0;
> +     ret->set = 0;
> +
> +     child = of_get_child_by_name(np, prefix);
> +     if (!child)
> +             return;
> +
> +     while (props->name) {
> +             name = props->name;
> +             shift = props->shift;
> +             props++;
> +
> +             if (name[0] == '-' ||
> +                 of_property_read_u32(child, name, &val))
> +                     continue;
> +
> +             width = props->shift - shift;
> +             mask = (1 << width) - 1;
> +             if (mask < val) {
> +                     dev_warn(dev, "%s invalid value %d", name, val);
> +                     continue;
> +             }
> +             mask = ~(mask << shift);
> +             ret->mask &= mask;
> +             ret->set |= val << shift;
> +     }
> +     while (props_flag->clr_name) {
> +             val = ~0;
> +             if (of_property_read_bool(child, props_flag->clr_name))
> +                     val = 0;
> +             else if (of_property_read_bool(child, props_flag->set_name))
> +                     val = 1;
> +             if (val != ~0) {
> +                     val <<= (props_flag->bit & 31);
> +                     mask = 1 << (props_flag->bit & 31);
> +                     ret->mask &= ~mask;
> +                     ret->set |= val;
> +             }
> +             props_flag++;
> +     }
> +}
> +
> +/* Read GPIO control */
> +/*
> + * DT example.
> + * gpio-pin-control {
> + *   pin@0 {
> + *    gpio-port;
> + *   };
> + *   pin@1 {
> + *    function;
> + *   };
> + * };
> + */
> +static void sm501_of_read_gpio(struct device *dev, struct device_node *np,
> +                            struct sm501_reg_init *hi, struct sm501_reg_init 
> *low)
> +{
> +     struct device_node *gpio_group, *pin;
> +     const char *prop_mode;
> +     unsigned int pin_no;
> +     int mode;
> +     u64 mask;
> +     u64 set;
> +
> +     mask = ~0;
> +     set = 0;
> +     gpio_group = of_get_child_by_name(np, "gpio-pin-control");
> +     if (gpio_group) {
> +             for_each_child_of_node(gpio_group, pin) {
> +                     mode = -1;
> +                     if (sscanf(pin->full_name, "pin@%u", &pin_no) == 1) {
> +                             if (of_property_read_bool(pin, "gpio-port"))
> +                                     mode = 0;
> +                             else if (of_property_read_bool(pin, "function"))
> +                                     mode = 1;
> +                     }
> +                     /* GPIO0 - 47 and 55 -63 */
> +                     if (mode < 0 ||
> +                         (pin_no >= 64 || (pin_no >= 48 && pin_no <= 54))) {
> +                             dev_warn(dev,
> +                                      "%s mode %s is invalid.", pin->name, 
> prop_mode);
> +                     } else {
> +                             mask &= ~(1 << pin_no);
> +                             set |= mode << pin_no;
> +                     }
> +             }
> +     }
> +     hi->set = set >> 32;
> +     low->set = set & 0xffffffff;
> +     hi->mask = mask >> 32;
> +     low->mask = mask & 0xffffffff;
> +}
> +
> +static inline int read_i2c_prop(struct device *dev, struct device_node 
> *child,
> +                             const char *name, u32 *val)
> +{
> +     if (of_property_read_u32(child, name, val)) {
> +             dev_warn(dev, "%s/%s not found. skip it.", 
> of_node_full_name(child), name);
> +             return -ENOENT;
> +     }
> +     return 0;
> +}
> +
> +/* Read GPIO I2C configuration */
> +/*
> + * DT example.
> + * gpio-i2c {
> + *    i2c@0 {
> + *   sda = <gpio-pin>;
> + *   scl = <gpio-pin>;
> + *   delay = <delay>;
> + *   timeout = <timeout>;
> + *    };
> + *    i2c@1 {
> + *      :
> + *    };
> + *    :
> + * };
> + */
> +static int sm501_parse_dt_gpio_i2c(struct device *dev, struct sm501_platdata 
> *plat,
> +                                struct device_node *np)
> +{
> +     struct device_node *i2c_group, *child;
> +     unsigned int i;
> +     u32 i2c_nr;
> +     int err;
> +
> +     i2c_group = of_get_child_by_name(np, "gpio-i2c");
> +     if (!i2c_group)
> +             return 0;
> +
> +     i2c_nr = of_get_child_count(i2c_group);
> +     plat->gpio_i2c = devm_kzalloc(dev, sizeof(*plat->gpio_i2c) * i2c_nr,
> +                                   GFP_KERNEL);
> +     if (!plat->gpio_i2c)
> +             return -ENOMEM;
> +
> +     plat->gpio_i2c_nr = i2c_nr;
> +     i = 0;
> +     for_each_child_of_node(i2c_group, child) {
> +             u32 bus;
> +
> +             if (sscanf(child->full_name, "i2c@%u", &bus) != 1) {
> +                     dev_warn(dev, "Unknown address %s\n", child->name);
> +                     continue;
> +             }
> +
> +             err = 0;
> +             plat->gpio_i2c[i].bus_num = bus;
> +             err += read_i2c_prop(dev, child, "sda", 
> &plat->gpio_i2c[i].pin_sda);
> +             err += read_i2c_prop(dev, child, "scl", 
> &plat->gpio_i2c[i].pin_scl);
> +             err += read_i2c_prop(dev, child, "delay", 
> &plat->gpio_i2c[i].udelay);
> +             err += read_i2c_prop(dev, child, "timeout", 
> &plat->gpio_i2c[i].timeout);
> +             if (err == 0)
> +                     i++;
> +     }
> +
> +     return 0;
> +}
> +
> +/* Read device functions */
> +static u32 sm501_read_devices(struct device *dev, struct device_node *np)
> +{
> +     static const char * const funcname[] = {
> +             "usb-host", "usb-slave", "ssp0", "ssp1",
> +             "uart0", "uart1", "fbaccel", "ac97",
> +             "i2s", "gpio",
> +     };
> +     struct property *prop;
> +     unsigned int i;
> +     const char *s;
> +     u32 ret = 0;
> +
> +     of_property_for_each_string(np, "smi,devices", prop, s) {
> +             for (i = 0; i < ARRAY_SIZE(funcname); i++) {
> +                     if (strcmp(s, funcname[i]) == 0) {
> +                             ret |= 1 << i;
> +                             goto next;
> +                     }
> +             }
> +             dev_warn(dev, "Unknown device function '%s'", s);
> +next:
> +     }
> +     if (!ret)
> +             dev_warn(dev, "devices not defined. disable all functions.");
> +     return ret;
> +}
> +
> +/* Build platform_data from OF property */
> +struct plat_dt {
> +     struct sm501_platdata plat;
> +     struct sm501_initdata init;
> +};
> +
> +static int sm501_parse_dt(struct sm501_devdata *sm, struct device_node *np)
> +{
> +     struct sm501_platdata *plat;
> +     struct plat_dt *dt_p;
> +     u32 word;
> +     int ret;
> +
> +     dt_p = devm_kzalloc(sm->dev, sizeof(*dt_p), GFP_KERNEL);
> +     if (!dt_p)
> +             return -ENOMEM;
> +
> +     plat = &dt_p->plat;
> +     plat->init = &dt_p->init;
> +
> +     plat->init->devices = sm501_read_devices(sm->dev, np);
> +     /* mclk and m1xclk are not u32, so convert between them using 
> intermediate variables. */
> +     of_property_read_u32(np, "smi,mclk", &word);
> +     plat->init->mclk = word;
> +     of_property_read_u32(np, "smi,m1xclk", &word);
> +     plat->init->m1xclk = word;
> +
> +     sm501_of_read_config(sm->dev, np, "misc-timing",
> +                          misc_timing, misc_timing_flag,
> +                          &plat->init->misc_timing);
> +     sm501_of_read_config(sm->dev, np, "misc-control",
> +                          misc_control, misc_control_flag,
> +                          &plat->init->misc_control);
> +     sm501_of_read_gpio(sm->dev, np,
> +                        &plat->init->gpio_high, &plat->init->gpio_low);
> +
> +     if (IS_ENABLED(CONFIG_MFD_SM501_GPIO) &&
> +         (plat->init->devices & SM501_USE_GPIO)) {
> +             ret = sm501_parse_dt_gpio_i2c(sm->dev, plat, np);
> +             if (ret)
> +                     return ret;
> +     }
> +     sm->platdata = plat;
> +     return 0;
> +}
> +
>  static int sm501_plat_probe(struct platform_device *dev)
>  {
>       struct sm501_devdata *sm;
> @@ -1406,6 +1715,12 @@ static int sm501_plat_probe(struct platform_device 
> *dev)
>               goto err_res;
>       }
>  
> +     if (IS_ENABLED(CONFIG_OF) && dev->dev.of_node) {
> +             ret = sm501_parse_dt(sm, dev->dev.of_node);
> +             if (ret)
> +                     goto err_res;
> +     }
> +
>       platform_set_drvdata(dev, sm);
>  
>       sm->regs = ioremap(sm->io_res->start, resource_size(sm->io_res));
> diff --git a/drivers/video/fbdev/sm501fb.c b/drivers/video/fbdev/sm501fb.c
> index d6fdc1737cd2..5de00f2570aa 100644
> --- a/drivers/video/fbdev/sm501fb.c
> +++ b/drivers/video/fbdev/sm501fb.c
> @@ -1932,6 +1932,106 @@ static int sm501fb_start_one(struct sm501fb_info 
> *info,
>       return 0;
>  }
>  
> +#if defined(CONFIG_OF)
> +static u32 read_display_flags(struct device_node *np)
> +{
> +     static const char * const name[] = {
> +             "use-init-done", "disable-at-exit", "use-hwcursor", 
> "use-hwaccel",
> +             "panel-no-fpen", "panel-no-vbiasen", "panel-inv-fpen", 
> "panel-inv-vbiasen",
> +     };
> +
> +     struct property *prop;
> +     unsigned int i;
> +     const char *s;
> +     u32 ret = 0;
> +
> +     of_property_for_each_string(np, "smi,flags", prop, s) {
> +             for (i = 0; i < ARRAY_SIZE(name); i++) {
> +                     if (strcmp(s, name[i]) == 0) {
> +                             ret |= 1 << i;
> +                             break;
> +                     }
> +             }
> +     }
> +     return ret;
> +}
> +
> +/* parse CRT / panel configuration */
> +static struct sm501_platdata_fbsub *dt_fbsub(struct device *dev,
> +                                          struct device_node *np,
> +                                          const char *name)
> +{
> +     struct sm501_platdata_fbsub *fbsub = NULL;
> +     struct fb_videomode *def_mode = NULL;
> +     struct device_node *child;
> +     const void *p_edid;
> +     u32 flags = 0;
> +     u32 bpp = 0;
> +     int len;
> +
> +     child = of_get_child_by_name(np, name);
> +     if (child == NULL)
> +             return NULL;
> +
> +     p_edid = of_get_property(child, "edid", &len);
> +     if (p_edid && len == EDID_LENGTH) {
> +             struct fb_monspecs *specs;
> +             u8 *edid;
> +
> +             edid = kmemdup(p_edid, EDID_LENGTH, GFP_KERNEL);
> +             if (edid) {
> +                     specs = kzalloc(sizeof(*specs), GFP_KERNEL);
> +                     if (specs) {
> +                             fb_edid_to_monspecs(edid, specs);
> +                             def_mode = specs->modedb;
> +                     }
> +             }
> +             kfree(edid);
> +     }
> +
> +     of_property_read_u32(child, "bpp", &bpp);
> +
> +     /* If flags property is obtained, fbsub is returned. */
> +     flags = read_display_flags(child);
> +     if (flags) {
> +             fbsub = devm_kzalloc(dev, sizeof(*fbsub), GFP_KERNEL);
> +             if (fbsub) {
> +                     fbsub->def_mode = def_mode;
> +                     fbsub->def_bpp = bpp;
> +                     fbsub->flags = flags;
> +             }
> +     }
> +     return fbsub;
> +}
> +
> +/* Build platform_data from OF property */
> +static struct sm501_platdata_fb *pdata_from_dt(struct device *dev, struct 
> device_node *np)
> +{
> +     enum sm501_fb_routing fb_route = SM501_FB_OWN;
> +     struct sm501_platdata_fb *pdata = NULL;
> +     struct sm501_platdata_fbsub *fb_crt;
> +     struct sm501_platdata_fbsub *fb_pnl;
> +     unsigned int flags = 0;
> +
> +     if (of_property_read_bool(np, "route-crt-panel"))
> +             fb_route = SM501_FB_CRT_PANEL;
> +     if (of_property_read_bool(np, "swap-fb-endian"))
> +             flags = SM501_FBPD_SWAP_FB_ENDIAN;
> +     fb_crt = dt_fbsub(dev, np, "crt");
> +     fb_pnl = dt_fbsub(dev, np, "panel");
> +     if (fb_crt || fb_pnl) {
> +             pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
> +             if (pdata) {
> +                     pdata->fb_route = fb_route;
> +                     pdata->flags = flags;
> +                     pdata->fb_crt = fb_crt;
> +                     pdata->fb_pnl = fb_pnl;
> +             }
> +     }
> +     return pdata;
> +}
> +#endif
> +
>  static int sm501fb_probe(struct platform_device *pdev)
>  {
>       struct sm501fb_info *info;
> @@ -1974,6 +2074,12 @@ static int sm501fb_probe(struct platform_device *pdev)
>                               if (info->edid_data)
>                                       found = 1;
>                       }
> +                     /* Get platform data compatible configuration */
> +                     if (!found) {
> +                             info->pdata = pdata_from_dt(dev, np);
> +                             if (info->pdata)
> +                                     found = 1;
> +                     }
>               }
>  #endif
>               if (!found) {
> -- 
> 2.39.2
> 

-- 
Lee Jones [李琼斯]

Reply via email to