On 6/9/2011 11:25 AM, CHARLES WHITE wrote: > I assume the black and red are for the mike and the white for PPT.
Use an ohmeter to find out. Then study the schematic or connector pinout info in the Elecraft manual to figure out which wire goes to which. You cannot hurt the mic with the ohmeter, and you should hear a in the mic click when the ohmeter leads hit the two wires going to the capsule. 73, Jim K9YC ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
