Len, Thanks for this post. A local here can't get his KPA500 running due to the same fault.
I've forwarded it to him. At least if paragraph 2 works for him, he can feel that the amp "works" -- sort of. He and Elecraft are in touch about this problem. 73 de Brian/K3KO On 8/27/2011 16:04, Len Chesler wrote: > I am utilizing FW vers. 1.02 and connecting to the K3 via the aux bus cable. If I set the KPA500 "PWR ON" menu setting to OPER, the K3 will not show the "KPA500 OPER" on the display and apprently is not syncing. In that state, if I transmit, the amp will immediately go into a Hi Pwr fault. (no matter how long I wait for the aux bus cable to sync). > > If ,However, I set the PWR ON menu default to STBY and manually switch to OPER, the K3 will properly sync and will display "KPA500 OPER" and all is well. > Could this be a firmware issue? Any suggestions? > Tnx > Len ----- No virus found in this message. Checked by AVG - www.avg.com Version: 10.0.1392 / Virus Database: 1520/3859 - Release Date: 08/26/11 ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html