> You didn't say how much coax ran from the K3 to the Palstar. For an
> accurate comparison it should be zero (use an adapter) or at most an
> couple of inches of coax.
It the KAT3 is in use one can *never* compare the SWR displayed by the
K3 and that displayed by an external SWR bridge/wattmeter since there
will be an *impedance changing device* (the KAT3) between the K3's SWR
detector and the external SWR detector even if the length of coax is
zero.
73,
... Joe, W4TV
On 1/2/2012 11:27 AM, Ron D'Eau Claire wrote:
> John, that is a common question.
>
> The KAT3 is providing a 1:1 SWR between the KAT3 and the PA *inside* the K3
> so the K3's PA is 'seeing' the correct load. The KAT3 cannot change the
> impedance of the antenna presented to the ANT connector.
>
> You didn't say how much coax ran from the K3 to the Palstar. For an accurate
> comparison it should be zero (use an adapter) or at most an couple of inches
> of coax.
>
> You can replace the antenna with a good dummy load, and they should read
> much closer, although most dummy loads have some error as well, nor are SWR
> meters precision instruments; they don't need to be for efficient
> transmission line operation at H.F.
>
> Ron AC7AC
>
>
> -----Original Message-----
> From: elecraft-boun...@mailman.qth.net
> [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of John Dziedziejko
> Sent: 02 January 2012 04:13
> To: elecraft@mailman.qth.net
> Subject: [Elecraft] K3 Internal Tuner Question
>
> I installed the KAT3 over the weekend and the construction and calibration
> was successful. This evening I hooked everything back up to check reception,
> tuning and swr. I have it set to AUTO, when I tap the ATU TUNE switch the
> tuner does its thing and I read a 1.0:1 swr on the K3 meter. I have a
> Palstar Wattmeter installed between the K3 and the antenna and for some
> reason I am getting a high swr on the Palstar meter of 5:1 and don't
> understand why. I have a multiband vertical antenna with a 4:1 Unun at the
> base of the antenna. Am I missing something here?
>
> A little hand holding would be appreciated.
>
> Regards,
>
> John W9QP
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
> __________ Information from ESET NOD32 Antivirus, version of virus signature
> database 6759 (20120101) __________
>
> The message was checked by ESET NOD32 Antivirus.
>
> http://www.eset.com
>
>
>
>
> __________ Information from ESET NOD32 Antivirus, version of virus signature
> database 6761 (20120102) __________
>
> The message was checked by ESET NOD32 Antivirus.
>
> http://www.eset.com
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
