On Sat, Oct 12, 2013 at 6:05 PM, Tom <tom...@videotron.ca> wrote: > ..I just tried nap3 and while I can get a spectrum there are so many > artifacts...
======== NaP3 has an automatic routine that can balance out images. It is supposed to work with any strong carrier, but it seems that it takes a super-strong signal to make it work correctly. To use it, inject a strong (>S9+30) carrier into the receiver antenna port. Tune so that it is off to one side of the pan picture. After a few seconds, all will be well. I have my XG3 connected to the aux ant jack on my K3 so that I can switch it in to do this little fix when necessary. It doesn't happen often, but sometimes NaP3 loses its mind and needs this treatment. Fiddling with the volume knobs on the Emu is fruitless, but this trick works perfectly in my shack. Once you get NaP3 working, you'll be happy. Tony KT0NY ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html