Nope, never did any hacks to the application. But I will look around at any config files I can view!
Jim Bennett / W6JHB Folsom, CA > On Jul 6, 2015, at 2:54 PM, Joe Subich, W4TV <w...@subich.com> wrote: > > > > Also, the WSJT-X Audio tab has no place to set the sample rate or bit > > depth - on my version, anyway. I'll re-try the WSJT group. > > IIRC, in an early version of WSJT-X there was a configuration file hack > to force the sound card to operate at 44,100 Hz. Did you set that by > chance? If so, there may be a conflict between the file and what you > have configured in your OS. > > 73, > > ... Joe, W4TV > > >> On 2015-07-06 5:30 PM, James Bennett wrote: >> This is looking more like a WSJT-X problem. I set my MIDI control to 48000 >> and fired up cocoaModem. Was able to easily send a 1kHz test tone and then >> send CQ. Going back to WSJT-X failed miserably. No amount of fiddling with >> the VOX gain or Mic drive control OR the controls on the front of the Tascam >> would make it work. >> >> Also, the WSJT-X Audio tab has no place to set the sample rate or bit depth >> - on my version, anyway. I'll re-try the WSJT group. >> >> Will post here if I get it resolved. I'm about ready to just blow it off and >> keep things at 41000. Arrghhh..... >> >> >> >>> On Jul 5, 2015, at 11:17 PM, Jim Brown <j...@audiosystemsgroup.com> wrote: >>> >>> Hi Jim, >>> >>> I'm only guessing, and I know nothing about the Apple world, but I'll do my >>> best. There are two communications speed settings at play. One is the >>> sample rate and bit depth for the USB sound card. That is set on the Audio >>> Tab of WSJT-X, and wants to be 16-bit 48 kHz. The other is communications >>> between WSJT-X and your radio for Rig Control via RS-232 (and perhaps a USB >>> adapter). 38,400 is as fast as the K3 goes, so that's what you must choose, >>> and both the K3 and the radio must have the same setting. >>> >>> As for going into TX -- I use VOX for ALL modes except CW, and it works >>> great. The gotchas are VOX Gain (a menu setting) and Line In Gain (set by >>> the Mic Gain control when the K3 is set for Digital modes. Perhaps all you >>> need is more Line Gain and/or VOX Gain. That's happened to me many times >>> when I've changed setups. The Line In should be set for five bars of ALC, >>> then set VOX Gain to activate TX. >>> >>> If this doesn't get you going, I suggest that you ask again on the WSJT >>> reflector. Some of the developers of WSJT-X monitor it, and may be able to >>> help. Who knows -- there may be a bug they need to squash. When I reported >>> rig control issues with the K3 with a WSJT-X Beta, they thanked me, and >>> several months later it seems to work. >>> >>> 73, Jim K9YC >>> >>>> On Sun,7/5/2015 9:18 PM, James Bennett wrote: >>>> Nobody??? Am I the only K3 owner using a Tascam sound card and a Mac to >>>> run WSJT-X?? >>>> >>>> Jim Bennett / W6JHB >>>> Folsom, CA >>>> >>>>> On Jul 4, 2015, at 12:30 PM, James Bennett <w6...@me.com> wrote: >>>>> >>>>> I posted this on the WSJT-X Yahoo group and still no resolution. Hoping >>>>> that perhaps someone on this reflector might have some thoughts on the >>>>> problem. It isn’t a real “problem” per se, as I can certainly use my >>>>> system as it is, but just wondering about this “quirk”. Here is my post: >>>>> >>>>> "I just recently upgraded from WSJT-X 1.4.0 to 1.5.0 and have a question >>>>> about something in the User Guide. I'm running on an iMac, OS X 10.10.4, >>>>> an Elecraft K3, and my sound card is a Tascam US-125M. I am able to use >>>>> the K3 and the new version of the software but have an issue with the >>>>> documentation procedure…. >>>>> >>>>> The WSJT-X user manual says to use the Apple Audio MIDI Setup utility to >>>>> configure the sound card to 48000 Hz, two channel, 16 bit. I have been >>>>> using the above configuration at 41000Hz with no problems. When I try >>>>> running at 48000 Hz, the radio does not go into transmit mode. If I >>>>> switch it back to 44100 Hz, it works OK. The specs for the US-125M >>>>> indicate that it should work up to 48000 Hz. When set to 48000 Hz, I’m >>>>> able to get the usual decodes, but can’t transmit. I’ve got it set for >>>>> the K3/KX3, and CAT control. >>>>> >>>>> Any idea why I'm limited to 44100 with this configuration and why 48000 >>>>> fails to work?" >>>>> >>>>> Jim / W6JHB >>>>> ______________________________________________________________ >>>>> Elecraft mailing list >>>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft >>>>> Help: http://mailman.qth.net/mmfaq.htm >>>>> Post: mailto:Elecraft@mailman.qth.net >>>>> >>>>> This list hosted by: http://www.qsl.net >>>>> Please help support this email list: http://www.qsl.net/donate.html >>>>> Message delivered to w6...@me.com >>>> ______________________________________________________________ >>>> Elecraft mailing list >>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft >>>> Help: http://mailman.qth.net/mmfaq.htm >>>> Post: mailto:Elecraft@mailman.qth.net >>>> >>>> This list hosted by: http://www.qsl.net >>>> Please help support this email list: http://www.qsl.net/donate.html >>>> Message delivered to j...@audiosystemsgroup.com >>> >>> ______________________________________________________________ >>> Elecraft mailing list >>> Home: http://mailman.qth.net/mailman/listinfo/elecraft >>> Help: http://mailman.qth.net/mmfaq.htm >>> Post: mailto:Elecraft@mailman.qth.net >>> >>> This list hosted by: http://www.qsl.net >>> Please help support this email list: http://www.qsl.net/donate.html >>> Message delivered to w6...@me.com >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:Elecraft@mailman.qth.net >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> Message delivered to li...@subich.com >> ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
