Hi James, I use a TASCAM US-366 with my Mac and have the sample are set to 48,000 Hz with no issues running WSJT-X versions 1.4 and 1.5. I use VOX control. You might have to go in and week the K3 VOX Gain and Line In Gain menu settings, however.
73, Bob Nobis - N7RJN n7...@nobis.net > On Jul 6, 2015, at 13:18, James Bennett <w6...@me.com> wrote: > > Nobody??? Am I the only K3 owner using a Tascam sound card and a Mac to run > WSJT-X?? > > Jim Bennett / W6JHB > Folsom, CA > >> On Jul 4, 2015, at 12:30 PM, James Bennett <w6...@me.com> wrote: >> >> I posted this on the WSJT-X Yahoo group and still no resolution. Hoping that >> perhaps someone on this reflector might have some thoughts on the problem. >> It isn’t a real “problem” per se, as I can certainly use my system as it is, >> but just wondering about this “quirk”. Here is my post: >> >> "I just recently upgraded from WSJT-X 1.4.0 to 1.5.0 and have a question >> about something in the User Guide. I'm running on an iMac, OS X 10.10.4, an >> Elecraft K3, and my sound card is a Tascam US-125M. I am able to use the K3 >> and the new version of the software but have an issue with the documentation >> procedure…. >> >> The WSJT-X user manual says to use the Apple Audio MIDI Setup utility to >> configure the sound card to 48000 Hz, two channel, 16 bit. I have been using >> the above configuration at 41000Hz with no problems. When I try running at >> 48000 Hz, the radio does not go into transmit mode. If I switch it back to >> 44100 Hz, it works OK. The specs for the US-125M indicate that it should >> work up to 48000 Hz. When set to 48000 Hz, I’m able to get the usual >> decodes, but can’t transmit. I’ve got it set for the K3/KX3, and CAT control. >> >> Any idea why I'm limited to 44100 with this configuration and why 48000 >> fails to work?" >> >> Jim / W6JHB >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:Elecraft@mailman.qth.net >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> Message delivered to w6...@me.com > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to n7...@nobis.net ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com