I put both cables in at build time. Unused one is routed into the shielded area and secured to the shield.
Easy to re-configure. Take off top and change cables. A pair of surgical clamps may be useful. Sent from my iPhone ...nr4c. bill > On Apr 1, 2016, at 1:56 PM, Sverre Holm (LA3ZA) <la...@nrrl.no> wrote: > > When I built my K3 some years ago I routed the second receiver's AUX antenna > input to the rear panel BNC connector. But now I have changed my mind and > want to route it through the KAT3 instead, in order to try diversity > reception. > > How complex is this to accomplish? I know I need to plug in another 30 cm > tmp cable to the KRX3 board than the one I am using now. But how many panels > do I need to remove from the K3? The top I'm sure I need to remove, but is > that enough? > > > > > > ----- > Sverre, LA3ZA > > K2 #2198, K3 #3391, > LA3ZA Blog: http://la3za.blogspot.com, > LA3ZA Unofficial Guide to K2 modifications: > http://la3za.blogspot.com/p/la3za-unofficial-guide-to-elecraft-k2.html > -- > View this message in context: > http://elecraft.365791.n2.nabble.com/Rerouting-the-KRX3-AUX-Input-from-the-Rear-BNC-to-the-KAT3-tp7615802.html > Sent from the Elecraft mailing list archive at Nabble.com. > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to n...@widomaker.com ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
