I have noticed that my P3 does not correctly save the Ref Lvl
for 160M over a power off/on cycle. The normal level for 160M
here is about 96 while all the other bands are above 100. When I
power off when set to another band, power on again, and switch
to 160M, the Ref Lvl is set to the level of the band where I was
when I turned off the power.
For example, if I am on 12M with a Ref Lvl of 144, and I power
the K3 and P3 off and then on again, I come up on 12M with a Ref
Lvl of 144 like I expect. If I then change bands, all the bands
15M thru 80M come up to the last Ref Lvl I used on those bands,
but 160M comes up at 144.
Note that I power the P3 from the K3 12V output and use the K3
power switch to turn both of them on and off.
Has anyone else seen this behavior?
73 Bill AE6JV
-----------------------------------------------------------------------
Bill Frantz | Since the IBM Selectric, keyboards have gotten
408-356-8506 | steadily worse. Now we have touchscreen keyboards.
www.pwpconsult.com | Can we make something even worse?
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
