David, This happens when SSB + CW is enabled. In CW WGHT menu tap 1 to toggle between SSB+CW (enabled) and SSB - CW
Tapping Keyer/Mic knob toggles between Keyer speed and Mic Gain rather than Meter Scales CMP/ALC and SWR/RF. The CMP/ALC scale is still shown temporarily when CMP or Mic Gain are adjusted. You can switch to DATA mode then change meter scales by tapping Keyer/mic knob then go back to SSB. 73 from David GM4JJJ > On 26 Apr 2016, at 16:54, David Orman <orma...@corenode.com> wrote: > > Hi, > > I tried tapping the keyer/mic button to change the display to RF output > from ALC while in USB and LSB modes, and it doesn't switch over. I seem to > remember this working before. I am on the latest firmware. Is there a trick > to this I'm missing? > > Thank you, > David > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to gm4...@yahoo.co.uk ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
