BIll, I believe that in Data mode, the bias if switched on in SSB is automatically switched off.
You are right about point 1, that tripped up a lot of people, including your's truly. 73 from David GM4JJJ > On 8 May 2016, at 15:46, Bill Frantz <fra...@pwpconsult.com> wrote: > > I had to set up my KX3 for digital operation with a SignaLink USB from > scratch again, and I had to learn the same "features" which tripped me up the > last time over again the hard way. I'm documenting them here in hopes I won't > forget them the next time. (I'm also writing them on a file card to keep with > the radio.) > > (1) High levels of Mic input show up as zero signal. The fix is to always > start from 0 and move slowly up in levels. Mic level 5 seems to be about > right for my setup. > > (2) You can't be in a digital mode (DATA A etc.) and turn off mic bias. All > you get is N/A. It seems to be a poor idea to DC bias the isolation > transformers in the SignaLink, so you really need it off. And of course, > voice modes won't work until you turn mic bias back on again. > > In an ideal world, the level, bias, and VOX settings would be saved > separately for Data and Voice modes. (And the radio would recognize that mic > input settings need to be made in data modes.) > > But the results are worth it. From New Hampshire, I've been able to work 14 > DXCCs including an ATNO. I also had a long rag chew with AE5ZA in Texas, all > on 20M PSK31/63 with only a few hours of operating. > > 73 Bill AE6JV > > --------------------------------------------------------------------------- > Bill Frantz |"We used to quip that "password" is the most common > 408-356-8506 | password. Now it's 'password1.' Who said users haven't > www.pwpconsult.com | learned anything about security?" -- Bruce Schneier > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to gm4...@yahoo.co.uk ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
