Phil,  I too have not ordered an SVGA adapter for my P3 as my 4K display only 
supports HDMI inputs.  I have hopes that Elecraft will offer an HDMI adapter in 
the (hopefully near) future.

Very 73 - Mike - K9JRI







> On May 27, 2018, at 10:30 PM, Phil Hystad <phys...@mac.com> wrote:
> 
> A rant of the day:
> 
> But, there is a big looming question — one I had when the SVGA feature was 
> released.  Why wasn’t it directly an HDMI interface in the first place.  
> Today, finding a good display with the latest features that still supports 
> SVGA is a no-go almost.  I believe that was probably the case when P3/SVGA 
> was released too or they were at least on equal footing.  Let’s face it, flat 
> screen TVs changed everything.
> 
> There should be an HDMI interface option made available for the P3.  I have 
> not yet bought the SVGA and I probably won’t because my only spare 20 inch 
> display (I use as extra display for iMac at times and also with RPi) is HDMI 
> and DVI capable but not SVGA.  No plans to buy a converter cable either.
> 
> My RPi has HDMI chip on it — the entire RPi board is only $30 so the chip 
> itself must be cheap — just looked up on Mouser, TI HDMI interface IC in 
> units of 250+ is $2.82.  Of course, there is more cost then the chip but 
> still, I am betting on equal terms with SVGA costs.
> 
> OK, I am climbing down from the rant bench.
> 
> 73, PEH
> 
>> On May 27, 2018, at 4:17 PM, Don Wilhelm <donw...@embarqmail.com> wrote:
>> 
>> Mark,
>> 
>> The P3 SVGA adapter will not support all VGA displays (but it will do most). 
>>  There is no guarantee that a VGA to HDMI converter will work, but you are 
>> welcome to try and report those which do work as well as those that do not.
>> 
>> 73,
>> Don W3FPR
>> 
>> On 5/27/2018 4:18 PM, Mark Wheeler wrote:
>>> I am trying to connect a 22” LCD TV to the P3 SVGA connection via the TV 
>>> HDMI connection. I purchased a 9 pin serial to HDMI cable but the P3 does 
>>> not appear to see it. I switched to the 2nd HDMI port on the TV, but still 
>>> no joy. I have enabled the SVGA monitor option in the P3 menu settings 
>>> also.  Any suggestions?
>>> I do see on Amazon that I can buy a 19-22” LCD monitor for about $100...
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft@mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to phys...@mac.com
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to k9...@mac.com

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Reply via email to