Ouch. Did you have an electrostatic event? All those buttons have one thing in common: They are using the signal SCANADC1 which is routed to input X3 on the HC4051 analog multiplexer chip U3 (front panel sheet 7). I hope this is not the case, but if that input is zapped, you will have the symptoms you see.
AB2TC - Knut Bruce Meier-2 wrote: > > The following buttons are failing and the others seem to be working fine. > > Failing buttons: > > Band / Mode: the right side of the buttons don't work > MODE (the up side) - down works fine > TEST - does not function > BAND (the up side) - down works fine > QSK - does not work > Other buttons: > SPOT/PITCH - no impact to either function > NR/ADJ - no impact when pushed > RATE/LOCK - neither function works > ANT - locked on Ant 1, will not select Ant 2 > > ----- AB2TC - Knut -- View this message in context: http://n2.nabble.com/K3---front-panel-issue-tp1450764p1450972.html Sent from the Elecraft mailing list archive at Nabble.com. _______________________________________________ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com