Did you set the Line In gain control to a value >0? on 09 Mar 05 10:43 Bud Governale, W3LL said the following: > I can't get any transmit audio via the Line-In connector. > > Connecting the Mic cable to the rear panel MIC connection produces good > transmit power and audio. > > I know audio is coming from the sound card output because it also drives the > computer speaker via its line in > connection. > > I tried moving the Mic connector from the rear panel MIC to the Line-In rear > panel position. This still would not > produce K3 SSB output. > > Moving the Line-In connector to the MIC rear panel connector produces good > transmit power and audio. > > The TX lights each time but no output via Line-In > The K3 is in LSB mode. > TX TEST is in normal. > MIC SEL is RPH > MIC + LIN is ON. > MIC Gain is 30 > Comp is 22. > > Why can't I transmit thru the Line-In connection? > > 73, > > Bud W3LL > w...@arrl.net > > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html