Sorry gremlins got in when you run the debian/configure script do it this way cd ~/linuxcnc-dev/debian ./configure uspace no-docs
Rod Webster *1300 896 832* +61 435 765 611 Vehicle Modifications Network www.vehiclemods.net.au On Thu, 28 Sept 2023 at 06:23, Rod Webster <r...@vehiclemods.net.au> wrote: > Gene, > Great you are making progress. > Your scripts won't work as you refer to 32 bit armhf and this is 64bit > arm64 > Also Buster uses Python 2.7 which was deprecated in Bullseye. Linuxcnc now > uses Python 3.11 and 2.7 is not available. > There should not be any missing dependencies to build linuxcnc as the > image builds linuxcnc from source. If there is you will be able to install > them once we sort out your network. > please follow the docs to build the packages > > http://linuxcnc.org/docs/devel/html/code/building-linuxcnc.html#_building_debian_packages > when you run the debian/configure script do it this way > cd ~/linuxcnc-dev/debian > ./configure uspace no-docse is once we get your network > > to set a fixed Ip address, you should edit /etc/network/interfaces > we don't need to touch dhcpcd.conf > geany and nano editors are included > Something like this but check the NIC name using ip a as it won't be eth0 > > auto eth0 iface eth0 inet static address 192.0.2.7/24 > gateway 192.0.2.254 > > To set DNS servers, add something like this which will use Google's DNS > servers: > > dns-nameservers 8.8.8.8 8.8.4.4 > > Ref: > https://wiki.debian.org/NetworkConfiguration#Configuring_the_interface_manually > > To restart networking with the new settings > sudo systemctl restart networking > > To set your host name to rpi4.coyote.den > > sudo hostnamectl set-hostname rpi4.coyote.den > > On my network, I let the router allocate IP addresses with DHCP and if a > fixed IP is required, I add a DHCP reservation on the router for the > specific MAC address. That way, there is no configuring of IP addresses on > the device. > > I think I've covered everything > > Rod Webster > *1300 896 832* > +61 435 765 611 > Vehicle Modifications Network > www.vehiclemods.net.au > > > On Thu, 28 Sept 2023 at 04:27, gene heskett <ghesk...@shentel.net> wrote: > >> On 9/26/23 14:54, Rod Webster wrote: >> > User cnc >> > PW cnc >> > Ref: >> > >> https://github.com/rodw-au/rpi-img-builder-lcnc/blob/linuxcnc/instructions.txt >> < >> https://github.com/rodw-au/rpi-img-builder-lcnc/blob/linuxcnc/instructions.txt >> > >> > >> Further findings, looking at /etc/network/interfaces, I am advised that >> for static addresses, which this is. I should consult etc/dhcpcd.conf >> and man dhcpcd.conf, but neither is installed. And w/o network access, >> I am DITW. I am black listed off the pi forum, seems I asked too many >> realtime questions 7 years ago when I was first setting this up on a >> rpi3b, which was a bit short of the power to do it smoothly as that >> lathe would stop for a few milliseconds now and then waiting on orders. >> The foundation officially does not support realtime. So I wound up >> building my own preempt-rt kernal, and not know anything about u-boot, I >> worked out a 26 megabyte tarball, the unpacked to /boot and /lib to >> install that kernel, which has been happily running this rpi4 from >> reboot to reboot. Months between reboots at times, dead stable. >> >> Right now my workspace SSD is out and a usb reader is in its usb3 >> socket, so my whole linuxcnc subdir has been cp -R installed. >> >> > Rod Webster >> > *1300 896 832* >> > +61 435 765 611 >> > Vehicle Modifications Network >> > www.vehiclemods.net.au <http://www.vehiclemods.net.au/> >> > >> > >> > On Wed, 27 Sept 2023 at 04:08, gene heskett <ghesk...@shentel.net >> > <mailto:ghesk...@shentel.net>> wrote: >> > >> > On 9/18/23 23:32, Rod Webster wrote: >> > > Gene, Use this link. >> > > >> > >> https://drive.google.com/drive/folders/1Bv4ceKAa0nYwDvc5eVNYFtU24PQGjKfQ >> <https://drive.google.com/drive/folders/1Bv4ceKAa0nYwDvc5eVNYFtU24PQGjKfQ >> > >> > > I rebuilt the image last night as there was an update to the >> > PREEMPT_RT >> > > patch. >> > > Also a 2.9 ISO for AMD64 is here >> > > >> > >> https://drive.google.com/drive/folders/1kW9GkNFZ7eZkfQSQPkiCHNDEXyBEfdnP >> <https://drive.google.com/drive/folders/1kW9GkNFZ7eZkfQSQPkiCHNDEXyBEfdnP >> > >> > > >> > What is the default pw? >> > >> > Cheers, Gene Heskett. >> > -- >> > "There are four boxes to be used in defense of liberty: >> > soap, ballot, jury, and ammo. Please use in that order." >> > -Ed Howdershelt (Author, 1940) >> > If we desire respect for the law, we must first make the law >> > respectable. >> > - Louis D. Brandeis >> > Genes Web page <http://geneslinuxbox.net:6309/ >> > <http://geneslinuxbox.net:6309/>> >> > >> >> Cheers, Gene Heskett. >> -- >> "There are four boxes to be used in defense of liberty: >> soap, ballot, jury, and ammo. Please use in that order." >> -Ed Howdershelt (Author, 1940) >> If we desire respect for the law, we must first make the law respectable. >> - Louis D. Brandeis >> Genes Web page <http://geneslinuxbox.net:6309/> >> >> _______________________________________________ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers
