specifically the command to set spindle speed MUST BE LOWERCASE
Nothing in a gcode file causing machine motion beyond
S1000 will execute. No error messages of any kind either. Found it by
surround the first move with (debug, msg) statements.
I have not gone to the new number the spindle syntax because that
reference in the docs is not very clear and doesn't actually explain it
that well, at least to me. Does it require a $ sign in front of the
spindle number? My limited exploration has not been successful at
rotating a spindle. Since I don't have anything that does qualify as a
spindle although I've both A and B axises now that can turn 400 rpms
synched to x or y, I would not call then spindles as their chucks are in
fact 3d printed square sockets.
The backplot showed the motion trace just fine for either s case. I have
killed it a couple times, but changing the view fixes it.
I changed the file back to a lowercase s:
s1000
and everything then seems to run normally.
So the old canary will live. ;o)> But he is certainly surprised.
Cheers, Gene Heskett, CET.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author, 1940)
If we desire respect for the law, we must first make the law respectable.
- Louis D. Brandeis
_______________________________________________
Emc-developers mailing list
Emc-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-developers
