Chris Radek schrieb: > On Sat, Apr 28, 2007 at 03:22:01AM -0400, Eric H. Johnson wrote: > >> 2> Similarly, if I issue "S3000 M3" in MDI mode, and then jog an axis which >> requires setting the mode to manual, the spindle turns off as soon as I >> start to jog. I assume that is from changing the mode from MDI to manual. Is >> there a way to issue the jog command which does not stop the spindle. > > Nope, unless you start it (using the nml command) after switching to > manual mode. I've also considered this a bug in the past, but was > told it was a feature. I'm still not sure it's a feature.
Hmm, I would agree with you and say it's not (necessarily) a feature. Perhaps this behaviour could be made configurable? cu, sven ------------------------------------------------------------------------- This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users